Abstract:As a promising new power source, the proton exchange membrane fuel cell (PEMFC) has attracted extensive attention. The PEMFC engine produces a large amount of waste heat during operation. The excessive temperature will reduce the efficiency and lifespan of PEMFC engine and even cause irreversible damage if not taken away in time. The thermal management system of the PEMFC plays a critical role in efficiency optimization, longevity and operational safety. To solve the problem of high heat production in the operation of the PEMFC, two approaches are proposed to improve the heat dissipation performance of the radiators in thermal management systems. Three kinds of nanofluids with excellent electrical and thermal conductivity–Al2O3, SiO2 and ZnO– are employed as the cooling medium. The radiator parameters are optimized to improve the heat transfer capability. A typical 1D thermal management system and an isotropic 3D porous medium model replacing the wavy fin are constructed to reveal the effects of the nanofluid and the parameters of the radiator performance and the thermal management system. The results show that all three kinds of nanofluids can effectively improve the heat transfer capacity of the coolant, among which the comprehensive performance of the Al2O3 nanofluid is best. When the mass flow rate is 0.04 kg/s and the concentration is 0.5 vol%, the amount of heat transfer of the Al2O3 nanofluid increases by 12.7% when compared with pure water. Under the same conditions, it can reduce the frontal area of the radiator by 12%. For the radiator, appropriate reduction of the fin pitch and wavy length and increase of wave amplitude can effectively improve the spread of heat. The use of fin parameters with higher heat dissipation power results in lower coolant temperatures at the inlet and outlet of the stack. The performance of the radiator is predicted by the two model-based approaches described above which provide a reliable theoretical basis for the optimization of the thermal management system and the matching of the components.

Comparison of Organic Coolants for Boiling Cooling of Proton Exchange Membrane Fuel Cell

Evaluation of cooling flow field of proton exchange membrane fuel cell based on heat transfer performance enhancement

Numerical study on heat transfer characteristics and performance evaluation of PEMFC based on multiphase electrochemical model coupled with cooling channel

Three‐dimensional simulations for counter‐flow proton exchange membrane fuel cells with thin catalyst‐coated membrane cooled by liquid water

Thermal Management Analysis of Proton Exchange Membrane Fuel Cell Filled with Phase Change Material in Cooling Channel

A single-phase, non-isothermal model for PEM fuel cells

Enhancing Proton-Exchange Membrane Fuel-Cell Heat Transfer Performance with Embedded Cooling Channel Design: A Systematic Numerical Study

Numerical Investigation and Optimization of Cooling Flow Field Design for Proton Exchange Membrane Fuel Cell

Experimental study of the thermal and power performances of a proton exchange membrane fuel cell stack affected by the coolant temperature

Liquid Cooling Techniques in Proton Exchange Membrane Fuel Cell Stacks: A Detailed Survey

Topology optimization of flow and heat transfer in coolant channels considering porous multi-heat source

Advancing heat management in proton-exchange membrane fuel cells through hybrid nano-composite phase change materials

Model-Based Performance Optimization of Thermal Management System of Proton Exchange Membrane Fuel Cell

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Improved flow field design for air-cooled proton exchange membrane fuel cells

Thermal management system modeling of a water-cooled proton exchange membrane fuel cell

Thermal performance analyses of pulsating heat pipe for application in proton exchange member fuel cell

Optimization design of proton exchange membrane fuel cell cooling plate based on dual-objective function topology theory

Investigation of heat and mass transfer properties of the wave staggered round table cooling flow field with a three-stage forked distribution zone

Thermal management of polymer electrolyte membrane fuel cells: A review of cooling methods, material properties, and durability

Liquid Cooling of Fuel Cell Powered Aircraft: The Effect of Coolants on Thermal Management