Abstract:It is well-known that the 9–12%Cr martensitic heat-resistant steels own excellent mechanical properties; yet, in the case of aging embrittlement mechanism, little has been documented with carbides effect. In this study, to understand the aging embrittlement mechanism in steel 10Cr12Ni3Mo2VN, we focused on high-temperature short-term aging embrittlement by investigating the relationship between the heat treatment, microstructures, and aging embrittlement. It is mainly interested in the effect of carbides on the impact toughness of the steel sample after a heat treatment. The results show that the steel appears a reversible short-term aging embrittlement at temperatures within 500–600℃. It was found that carbides play an important role in the aging embrittlement, especially the M7C3-type carbides. Carbides formed at boundaries cause boundaries weakening and induce tempered martensite matrix to fracture in quasi-cleavage mode, which leads to the aging embrittlement. It was also found that the aging embrittlement can be eliminated by re-tempering at a higher temperature due to the transformation of carbides from M7C3-type to M23C6-type. Aging embrittlement arises again but becomes weak after a re-aging treatment. In addition, by refining prior austenite grains, increasing temper temperature and reducing carbon content, it can improve the resistance to aging embrittlement in the sample as refining grains increase the resistance to brittle fracture; what’s more, it could reduce the precipitation of carbides at boundaries during aging by increasing temper temperature and reducing carbon content.

Hardness Increases Due to (fe, Cr)2C Carbide Precipitated During Natural Aging in High Chromium Cast Iron

Age-Hardening Behaviour and the Factors of 00Cr12Ni9Mo4Cu2 Maraging Stainless Steel and Its Factors

Effect of Ti Content and Ageing on Microstructure and Hardness of 00cr12ni9mo4cu Maraging Stainless Steel

Microscopic Study of Carbide Precipitation during Heat Treatment of 35Cr–4C High Chromium Cast Iron

Effect of Chromium-Induced (fe, Cr)3C Toughness Improvement on the Two-Body Abrasive Wear Behaviors of White Cast Iron

Influence of Tungsten on Microstructure and Properties of As-Cast Hi-Cr Cast Iron

Effect of temperature and time on the precipitation of κ-carbides in Fe–28Mn–10Al–0.8C low-density steels: Aging mechanism and its impact on material properties

Effect of quenching temperature on microstructure and properties of multivariate high chromium cast iron

Carbides Dissolution in 5Cr15MoV Martensitic Stainless Steel and New Insights into Its Effect on Microstructure and Hardness

The effect of Cr content on intragranular κ-carbide precipitation in Fe-Mn-Al-(Cr)-C low-density steels: A multiscale investigation

Hardening Through an Ultrafine Carbide Precipitation in Austenite of a Low-Carbon Steel Containing Titanium and Tungsten

Effect of Carbides on High-Temperature Aging Embrittlement in 12%cr Martensitic Heat-Resistant Steel

Twofold age-hardening mechanism of Al-added high-Cr ODS ferritic steels

Tempering temperature dependence on the microstructure, mechanical properties and wear behaviour of a novel high chromium cast iron

Abrasive wear behavior and mechanism of high chromium cast iron

Effect of Cu addition on hardness and microstructural features of low alloy white cast iron

Effect of Chromium Content on Microstructure, Hardness, and Wear Resistance of As-Cast Fe-Cr-B Alloy

Effect of Heat Treatment on Microstructure and Mechanical Properties of a Ti-bearing Hypereutectic High Chromium White Cast Iron

Coarsening and Hardening Behaviors of Cu-Rich Precipitates in Super304H Austenitic Steel

Effect of TiC Particle Additions on Structure and Properties of Hypereutectic High Chromium Cast Iron

Κ-Carbide Hardening in a Low-Density High-Al High-Mn Multiphase Steel