Abstract:The literature is replete with studies of cementitious and geologic materials under multiaxial states of stress. However; there still exists division over the character of the failure mode under multiaxial states of stress. Some experts state that the failure is diffuse. The classical barrel-shaped specimen removed from a test cell intact is cited as evidence. Other researchers state that the failure is characterized by failure planes orientated parallel to the maximum compressive stress for all values of hydrostatic pressure. Tests on geologic materials have shown that the failure is nearly parallel to the maximum compressive stress under uniaxial stress. The orientation increases angle with respect to the maximum compressive stress as the confining pressure increases. Other sources simply state that there is a change in mode from splitting failure to crushing failure as confinement increases. The objective of this research is to better define the character of the failure mechanism as confining pressure increases. In this study triaxial rests on 95 mortar cylinders show that there is a change in the orientation of the failure plane as confining pressure is increased. The failure is characterized by a distinct failure surface or surfaces that change orientation from nearly vertical to angled as confinement increases. Furthermore, rest data indicate that localized deformations occur within 5% of the peak stress. These results imply that the failure is truly characterized through localized deformations and is not diffuse. Knowledge of such behavior is important because if places restrictions on the form of the constitutive model in order to predict these features. The implications of these findings on the constitutive model are discussed in detail in a companion paper. Published by Elsevier Science Ltd.

Confinement-dependent failure criterion for high-strength concrete in multiaxial stress states

Effective restrained radius of confined concrete

Compressive Behavior of Concrete Confined by Carbon Fiber Composite Jackets

High-Strength Concrete Subjected to Triaxial Compression

Stress–Strain Model of High-Strength Concrete Confined by Lateral Ties under Axial Compression

Confinement enhanced damage-plasticity model for concrete

The effects of confinement on the failure orientation in cementitious materials experimental observations

Experimental investigation of rigid confinement effects of radial strain on dynamic mechanical properties and failure modes of concrete

Static-Dynamic Combined Multiaxial Strength Criterion For Concrete

Dynamic Compression Behaviors of Concrete under True Triaxial Confinement: an Experimental Technique

Unified Failure Criteria for Freeze-Thaw Damaged Concrete under Multiaxial Stress State: an Innovative Uniaxial Strength-Dependent Prediction Method

Static and Dynamic Meso-Failure-mechanism of Concrete under Confined Compression

Behaviour of high-strength concrete columns confined by spiral reinforcement under uniaxial compression

Mechanical properties of high-performance concrete under triaxial compression

Axial Compressive Behavior of Circular Composite Columns with External Confinement

Failure Criteria and Constitutive Relationship of Lightweight Aggregate Concrete under Triaxial Compression

Multiaxial compressive strength of hybrid fiber reinforced concrete: A unified empirical model

Experimental, Numerical, and Analytical Studies of Uniaxial Compressive Behavior of Concrete Confined by Ultra-High-Performance Concrete

Influence of Stress State on Dynamic Behaviors of Concrete under True Triaxial Confinements

Study on the Dynamic Mechanical Properties of Ultrahigh-Performance Concrete under Triaxial Constraints

An Improved Failure Criterion for the Concrete Based on Unified Twin Shear Strength Theory