Abstract:AbstractDifficult-to-machine materials such as Ni-based superalloy suffer from severe tool wear and poor surface quality; therefore, the cooling mechanism is the key to improving machining performance and reducing the environmental pollution in manufacturing. In the past, plenty of studies verified that the micro-texture on the cutting insert improved the cutting performance under the same cooling condition. The main explanation is that the second generated cracks caused the capillary siphon phenomenon and increased the wettability of the subsurface of the workpiece. In order to investigate the effect of surface wettability differences on the cutting performance of the tool under different micro-textured morphologies, three types of micro-textured CBN tools with pit, linear, and sinusoidal morphologies were fabricated by laser machining technology. Through cutting experiments on Inconel 718 Ni-based superalloy, the cutting force, tool wear, and machined surface roughness of different micro-textured tools were compared and analyzed. The relationship between cutting performance and wettability of different shaped micro-texture was obtained by measuring the contact angle using PT-705B optical angular contact meter. The experimental results show that the presence of surface micro-textures enhances the surface wettability of the tool. It effectively reduces the cutting force and slows down the rake face’s wear and the machined part’s surface roughness. Compared with other morphologies, sinusoidal micro-textured tools show the best cutting performance. Among the four morphologies of micro-textured tools, cutting performance improvement increases with surface wettability. More generally, these primary findings are consistent with research showing that wettability is critical in micro-texture generation for high-performance machining. The conclusion is very much the key component in future attempts to overcome the assumption of the capillary siphon phenomenon on the subsurface of the workpiece.

Enhanced Machinability of Ni-based Single Crystal Superalloy by Vibration-Assisted Diamond Cutting

Experimental study of surface integrity in ultrasonic vibration–assisted milling of GH4169 nickel-based superalloy

Atomistic investigation of machinability of monocrystalline 3C–SiC in elliptical vibration-assisted diamond cutting

Wear resistance enhancement of Inconel 718 via high-speed ultrasonic vibration cutting and associated surface integrity evaluation under high-pressure coolant supply

Study on tool wear mechanism of single-crystal diamond in ultrasonic vibration elliptical cutting of tungsten heavy alloy

Investigation of Surface Integrity of Selective Laser Melting Additively Manufactured AlSi10Mg Alloy under Ultrasonic Elliptical Vibration-Assisted Ultra-Precision Cutting

Cutting condition effects on microstructure and mechanical characteristics of Ni-based superalloys—a review

Grain Refinement-Induced Machined Surface Quality Promotion in Ultrasonic Vibration-Assisted Polycrystalline Diamond Cutting of Polycrystalline Cu

Surface wear resistance and microstructure characteristic in longitudinal–torsional ultrasonic vibration side milling of GH4169 superalloy

Study on the Vertical Ultrasonic Vibration-Assisted Nanomachining Process on Single-Crystal Silicon

Study on milling material removal mechanism and surface integrity of nickel-based single crystal superalloy DD5

Investigation on the machinability of SiCp/Al composite by in-situ laser assisted diamond cutting

Effect of micro-textured morphology with different wettabilities on tool cutting performance

Grinding surface and subsurface stress load of nickel-based single crystal superalloy DD5

Cutting performance of the nanotwinned cBN tool in nano-cutting of Ni-Cr-Fe alloy

Theoretical and numerical studies of surface microstructural transformation in ultrasonic elliptical vibration cutting tungsten heavy alloys

Analytical and experimental study on micro-grinding surface-generated mechanism of DD5 single-crystal superalloy using micro-diamond pencil grinding tool

Grinding subsurface damage mechanism of nickel-based single crystal superalloy based on stress-strain

Analysis of laser-induced surface damage of single-crystal Ni-based superalloy towards improving machinability

On the Anisotropic Milling Machinability of DD407 Single Crystal Nickel-Based Superalloy

Effects of processing parameters on the surface quality of wrought Ni-based superalloy by ultrasonic-assisted electrochemical grinding