Abstract:Ultra-high molecular weight polyethylene (PE) fiber with startling mechanical properties and elastic modulus is considered as an ideal reinforcing component for Ultra-High-Strength and High-Ductility Cementitious Composites (UHS-HDCCs). However, the fiber/matrix interface bonding is weakened due to the hydrophobic nature of the PE fiber surface, restricting the perfect expression of the PE fiber inherent characteristics. In this work, a promising technology for the PE fiber surface functionalization using a combination of bio-inspired polydopamine (PDA) and deposited nano-SiO 2 was proposed to enhance the fiber/matrix interfacial bonding in UHS-HDCCs. The results showed that PDA produced a uniform coating layer on the surface of PE fiber, and nano-SiO 2 was successfully grafted to the surface of PE fiber through PDA as a bridge. The coated PDA and nano-SiO 2 layers enhanced the wettability of the PE fiber surface. Nano-SiO 2 layers provided nucleation sites and reaction raw materials for C–S–H gel. Moreover, the SiO 2 -PDA-PE fibers improved the ultimate tensile stress and tensile strain capacity of UHS-HDCCs to be 116.3% and 133.5% respectively, compared to that of UHS-HDCCs incorporating pristine PE fiber. Furthermore, the SiO 2 -PDA-PE fibers effectively reduced the crack width and crack spacing while increasing the number of cracks and energy absorption capacity of UHS-HDCCs when subjected to increasing uniaxial tensile load. The single fiber pullout results showed that both PDA-PE fibers and SiO 2 -PDA-PE fibers enhanced the peak force, chemical bond, frictional bonding stress, slip hardening coefficient, and pullout energy. Obviously, the positive effect of SiO 2 -PDA-PE fibers on the critical parameters of the fiber interface is higher than that of PDA-PE fibers except for the chemical bond. This work explored a novel way to modify the physicochemical performance of PE fiber surface for matching the strain hardening behavior of UHS-HDCCs, which is meant to guide the mix-design optimization of UHS-HDCCs.

Effect of PE fiber coated by polydopamine and nano-SiO2 on the strain hardening behavior of ultra-high-strength and high-ductility cementitious composites

Effect of PE fiber coated by polydopamine and nano-SiO 2 on the strain hardening behavior of Ultra-High-Strength and High-Ductility Cementitious Composites

Effect of Modified PE Fiber Grafted with Nano-Sio2 on the Tensile Properties of High-Strength Engineering Cementitious Composites

Tailoring of polyethylene fiber surface by coating silane coupling agent for strain hardening cementitious composite

High‐performance Fiber‐reinforced Composites with a Polydopamine/epoxy Silane Hydrolysis‐condensate Bilayer on Surface of Ultra‐high Molecular Weight Polyethylene Fiber

A novel PDA/POSS transition layer on the surface of UHMWPE fibers by co-depositing to improve the mechanical properties of composites

Verification of Mechanism for Effect of Silane Coupling Agent Modification of Polyethylene (PE) Fiber's Surface on Strain-Hardening Behavior of High-Strength Cementitious Composites

Effects of Carbon Nanotube-Polydopamine Hybridization on the Mechanical Properties of Short Carbon Fiber/polyetherimide Composites

Effect of PE Fiber Content on Mechanical Behavior of Cementitious Composite

Mussel-inspired modification of carbon fiber via polyethyleneimine/polydopamine co-deposition for the improved interfacial adhesion

On Use of Polyvinylpyrrolidone to Modify Polyethylene Fibers for Improving Tensile Properties of High Strength ECC

Effect of fiber type on the bending and uniaxial tensile properties of high-strength high-ductility cementitious composites

Micromechanics Theory Guidelines and Method Exploration for Surface Treatment of PVA Fibers Used in High-Ductility Cementitious Composites

Synergistically improving interface behavior by designing physical twisting structure and "rigid-flexible" interface layer on ultra-high molecular weight polyethylene (UHMWPE) fiber surface

Enhancing the PVA Fiber-Matrix Interface Properties in Ultra High Performance Concrete: an Experimental and Molecular Dynamics Study

Enhancing the Interfacial Property Between UHMWPE Fibers and Epoxy Through Polydopamine and SiO2 Surface Modification

Physical and Mechanical Properties of Ultra-High Strength and High Ductility Cementitious Composites

Ti3C2Tx MXene Modified Polyethylene Fibers for Enhancing Interface Properties of Strain-Hardening Cementitious Composites

Design of Ultra-High Strength, Ultra-High Ductility Cementitious Composites (UHS-UHDCC)

Catechol and epoxy functionalized ultrahigh molecular weight polyethylene (UHMWPE) fibers with improved surface activity and interfacial adhesion

Enhanced Interphase Between Thermoplastic Matrix and UHMWPE Fiber Sized with CNT-modified Polydopamine Coating