Abstract:Ultra-high molecular weight polyethylene (PE) fiber with startling mechanical properties and elastic modulus is considered as an ideal reinforcing component for Ultra-High-Strength and High-Ductility Cementitious Composites (UHS-HDCCs). However, the fiber/matrix interface bonding is weakened due to the hydrophobic nature of the PE fiber surface, restricting the perfect expression of the PE fiber inherent characteristics. In this work, a promising technology for the PE fiber surface functionalization using a combination of bio-inspired polydopamine (PDA) and deposited nano-SiO 2 was proposed to enhance the fiber/matrix interfacial bonding in UHS-HDCCs. The results showed that PDA produced a uniform coating layer on the surface of PE fiber, and nano-SiO 2 was successfully grafted to the surface of PE fiber through PDA as a bridge. The coated PDA and nano-SiO 2 layers enhanced the wettability of the PE fiber surface. Nano-SiO 2 layers provided nucleation sites and reaction raw materials for C–S–H gel. Moreover, the SiO 2 -PDA-PE fibers improved the ultimate tensile stress and tensile strain capacity of UHS-HDCCs to be 116.3% and 133.5% respectively, compared to that of UHS-HDCCs incorporating pristine PE fiber. Furthermore, the SiO 2 -PDA-PE fibers effectively reduced the crack width and crack spacing while increasing the number of cracks and energy absorption capacity of UHS-HDCCs when subjected to increasing uniaxial tensile load. The single fiber pullout results showed that both PDA-PE fibers and SiO 2 -PDA-PE fibers enhanced the peak force, chemical bond, frictional bonding stress, slip hardening coefficient, and pullout energy. Obviously, the positive effect of SiO 2 -PDA-PE fibers on the critical parameters of the fiber interface is higher than that of PDA-PE fibers except for the chemical bond. This work explored a novel way to modify the physicochemical performance of PE fiber surface for matching the strain hardening behavior of UHS-HDCCs, which is meant to guide the mix-design optimization of UHS-HDCCs.

Facile and environment-friendly mussel-inspired surface modification of PBO fibers via dopamine/3-aminopropyltrimethoxysilane co-deposition for advanced composite

Improvements in Compatibility and Properties of Biocomposites Modified Through Nanosilica Attachment

Separation Materials Based on Mussel-Bioinspired Surface Chemistry

Enhancing interfacial adhesion and mechanical performance of PBO fibers composites through mussel‐inspired molecular regulation of interphase structure

Nondestructive Strategy to Effectively Enhance the Interfacial Adhesion of PBO/Epoxy Composites

In situ growth of TiO 2 nanoparticles onto PBO fibers via a mussel‐inspired strategy for enhancing interfacial properties and ultraviolet resistance

Mussel-inspired Polydopamine Functionalized PBO Fibers As an Efficient Additive for UHMWPE Composites with Improved Tribological Performance

Enhancing the Interfacial Property Between UHMWPE Fibers and Epoxy Through Polydopamine and SiO2 Surface Modification

Simple-effective strategy for surface modification via annealing treatment polydopamine coating

Bioinspired Modification via Green Synthesis of Mussel-Inspired Nanoparticles on Carbon Fiber Surface for Advanced Composite Materials

Enhanced high‐temperature tribological performance of PTFE / PI fabric composites by simultaneously introducing PDA / SiO 2 hybrid coating and aramid product reinforcements

Effect of PE fiber coated by polydopamine and nano-SiO 2 on the strain hardening behavior of Ultra-High-Strength and High-Ductility Cementitious Composites

Boosting interfacial adhesion in PBO fiber/epoxy composite by employing finely granular-structured polyaniline as an interfacial intensifier

Polyhedral Oligomeric Silsesquioxane Encountering Tannic Acid: A Mild and Efficient Strategy for Interface Modification on Carbon Fiber Composites

Mussel-inspired laccase-mediated polydopamine graft onto bamboo fibers and its improvement effect on poly(3-hydroxybutyrate) based biocomposite

Improving the interfacial adhesion between recycled carbon fibres and polyphenylene sulphide by bio-inspired dopamine for advanced composites manufacturing

A novel PDA/POSS transition layer on the surface of UHMWPE fibers by co-depositing to improve the mechanical properties of composites

Random copolymer membrane coated PBO fibers with significantly improved interfacial adhesion for PBO fibers/cyanate ester composites

Synergistically improving interface behavior by designing physical twisting structure and "rigid-flexible" interface layer on ultra-high molecular weight polyethylene (UHMWPE) fiber surface

Significantly improved interfacial properties and wave-transparent performance of PBO fibers/cyanate esters laminated composites via introducing a polydopamine/ZIF-8 hybrid membrane

Surface modification of PBO fibers by direct fluorination and corresponding chemical reaction mechanism