Abstract:We present an all-fiber, fully open Fabry-Perot interferometer (FPI) cavity that is suitable for fluidic measurement applications. Fabrication of the FPI involves the alignment and bonding of three optical fiber sections using either ceramic glue or low-temperature melting glass. The fabrication procedure allows the protection of the cleaved optical fiber end faces, which serve as the two mirrors of the FPI, from damage, thus ensuring the high visibility of the FPI sensor. The FPI's complete openness permits the analyte of interest fluids to flow smoothly into the cavity and interact directly with the light, obviating the need for additional assistance. The fabrication experiment demonstrates that the fabrication procedure can readily achieve a visibility of over 20 dB. Refractive index testing indicates that the sensor exhibits a sensitivity of over 1116 nm/RIU within the range of 1.334-1.375. A comparison of temperature investigations indicates that the fully open cavity FPI fabricated by bonding with low-temperature melting glass exhibits relatively lower temperature immunity than that bonded with ceramic glue. Both have a relatively low temperature fluctuation within the temperature range of 40°C-100°C, with less than 3 nm and 4.5 nm in the over 60°C changes, respectively. Our proposed fully open FPI is an economical, robust, and simple-to-fabricate structure with the potential for mass production. This renders it an appealing option for practical optofluidics applications.

Optoelectrode Based on Fiber Fabry-Perot Cavity Functionalized by Conductive Indium Tin Oxide

Optoelectrode Based on Conductive Fiber Fabry-Perot Probe for Simultaneous Electrochemical and Optical Sensing

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

An Optical Fiber Integrated Optoelectrode for the Photoelectrochemical Detection

Integrated Fiber-Based Optoelectrode for Electrochemiluminescence Sensing

In-line fiber optic optofluidic sensor based on a fully open Fabry-Perot interferometer

Dielectric Film Based Optical Fiber Sensor Using Fabry–Perot Resonant Structure

In-Fiber Cascaded FPI Fabricated by Chemical-Assisted Femtosecond Laser Micromachining for Micro-Fluidic Sensing Applications

Asymmetric Fabry-Pérot interferometric cavity for fiber optical sensors

Novel Fabry-Perot Fiber Optic Sensor with Multiple Applications

Refractive Index Sensing Characteristic of A Hybrid-Fabry-Perot Interferometer Based on an In-Fiber Ellipsoidal Cavity

Optical Fiber Fabry-Perot Displacement Sensor Based on Chemical Etching Method

Optical fiber Fabry-Perot refractive-index sensor fabricated by femtosecond laser etching

Research Progress on F-P Interference-Based Fiber-Optic Sensors.

Design and Characterization of Bio-Chemical Sensor Based on Photonic Crystal Fiber with Fluorine-Doped Tin Oxides Film

Research Progress on F-P Interference—Based Fiber-Optic Sensors

Single-mode fiber-optic Fabry–Perot interferometry sensor based on optical cross-correlation demodulation

Label-Free Immunosensor Based on Optical Fiber Fabry–Perot Interferometer

Novel fabry-pérot fiber refractive-index sensor with microchannel