Abstract:We present an all-fiber, fully open Fabry-Perot interferometer (FPI) cavity that is suitable for fluidic measurement applications. Fabrication of the FPI involves the alignment and bonding of three optical fiber sections using either ceramic glue or low-temperature melting glass. The fabrication procedure allows the protection of the cleaved optical fiber end faces, which serve as the two mirrors of the FPI, from damage, thus ensuring the high visibility of the FPI sensor. The FPI's complete openness permits the analyte of interest fluids to flow smoothly into the cavity and interact directly with the light, obviating the need for additional assistance. The fabrication experiment demonstrates that the fabrication procedure can readily achieve a visibility of over 20 dB. Refractive index testing indicates that the sensor exhibits a sensitivity of over 1116 nm/RIU within the range of 1.334-1.375. A comparison of temperature investigations indicates that the fully open cavity FPI fabricated by bonding with low-temperature melting glass exhibits relatively lower temperature immunity than that bonded with ceramic glue. Both have a relatively low temperature fluctuation within the temperature range of 40°C-100°C, with less than 3 nm and 4.5 nm in the over 60°C changes, respectively. Our proposed fully open FPI is an economical, robust, and simple-to-fabricate structure with the potential for mass production. This renders it an appealing option for practical optofluidics applications.

Dielectric Film Based Optical Fiber Sensor Using Fabry–Perot Resonant Structure

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Multiplexed fiber-optic Fabry-Pérot cavities for refractive index and temperature sensing fabricated using diamond-blade dicing

Refractive Index Sensor Based on Hollow Optical Fiber with Metal-Dielectric-Metal Multilayered Films Structure

Fiber optic hybrid structure based on an air bubble and thin taper for measurement of refractive index, temperature, and transverse load

Multiple fano resonances based on all-dielectric metastructure for refractive index sensing

Ultra compact and sensitive optical fiber interferometric refractive index sensor

Refractive Index Sensing Characteristic of A Hybrid-Fabry-Perot Interferometer Based on an In-Fiber Ellipsoidal Cavity

In-line fiber optic optofluidic sensor based on a fully open Fabry-Perot interferometer

Refractive Index Sensor Based on Double Side-Polished U-Shaped Plastic Optical Fiber

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

Fiber-optic sensor tip for measuring temperature and liquid refractive index

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

Investigation of a D-Shaped Plastic Optical Fiber Assisted by a Long Period Grating for Refractive Index Sensing

All-Fiber Fabry-Perot Interferometer Gas Refractive Index Sensor Based on Hole-Assisted One-Core Fiber and Vernier Effect

High FOM PCF-SPR refractive index sensor based on MgF 2 -Au double-layer films

Optical steelyard: high-resolution and wide-range refractive index sensing by synergizing Fabry–Perot interferometer with metafibers

All In-Fiber Fabry–Pérot Interferometer Sensor Towards Refractive Index and Temperature Simultaneous Sensing

Balloon-like Singlemode-Tapered Multimode-Singlemode Fiber Structure for Refractive Index Sensing

Essential Roles of Snf5p in Snf-Swi Chromatin Remodeling In Vivo