Abstract:We present an all-fiber, fully open Fabry-Perot interferometer (FPI) cavity that is suitable for fluidic measurement applications. Fabrication of the FPI involves the alignment and bonding of three optical fiber sections using either ceramic glue or low-temperature melting glass. The fabrication procedure allows the protection of the cleaved optical fiber end faces, which serve as the two mirrors of the FPI, from damage, thus ensuring the high visibility of the FPI sensor. The FPI's complete openness permits the analyte of interest fluids to flow smoothly into the cavity and interact directly with the light, obviating the need for additional assistance. The fabrication experiment demonstrates that the fabrication procedure can readily achieve a visibility of over 20 dB. Refractive index testing indicates that the sensor exhibits a sensitivity of over 1116 nm/RIU within the range of 1.334-1.375. A comparison of temperature investigations indicates that the fully open cavity FPI fabricated by bonding with low-temperature melting glass exhibits relatively lower temperature immunity than that bonded with ceramic glue. Both have a relatively low temperature fluctuation within the temperature range of 40°C-100°C, with less than 3 nm and 4.5 nm in the over 60°C changes, respectively. Our proposed fully open FPI is an economical, robust, and simple-to-fabricate structure with the potential for mass production. This renders it an appealing option for practical optofluidics applications.

Single-mode fiber-optic Fabry–Perot interferometry sensor based on optical cross-correlation demodulation

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

Optical Correlation Based Demodulator for Fiber-optic Fabry-Perot Sensor

Intrinsic Fiber-Optic Fabry-Perot Interferometer Based On Arc Discharge And Single-Mode Fiber

An investigation of interference/intensity demodulated fiber-optic Fabry–Perot cavity sensor

High-sensitivity fiber temperature and pressure sensor based on fabry-perot interferometry and Vernier effect

FPI-based fibre-optic sensor fabricated by excimer laser micromachining and fusion splicing HCF for multi-parameter measurements

In-line fiber optic optofluidic sensor based on a fully open Fabry-Perot interferometer

A fiber air-gap Fabry–Pérot temperature sensor demodulated by using frequency modulated continuous wave

An Optical Fiber Pressure Sensor Based on F-P Interferometry and Intensity Demodulation

High-sensitivity Double-Parameter Sensor Based on the Fibre-Tip Fabry–Pérot Interferometer

A novel multicore fiber temperature sensor based on Fabry-Perot structure

Temperature sensor based on optical fiber Fabry-Pérot interferometer

Miniature Fabry-Perot interferometric sensor for temperature measurement based on photonic crystal fiber

High Sensitivity Fabry-Perot Interferometer Based on Offset Splicing Fibers and Vernier Effect for Strain Measurement

Open-Cavity Fabry-Perot Interferometer Pressure And Temperature Fiber Sensor Based On Photonic Crystal Fiber

Asymmetric Fabry-Pérot interferometric cavity for fiber optical sensors

Simultaneous Measurement of Air Pressure and Temperature Using Fiber-Optic Cascaded Fabry–Perot Interferometer

A Fabry–Perot Interferometer Strain Sensor Based on Concave-Core Photonic Crystal Fiber