Abstract:Hundreds of picosecond pulses amplifier based on Yb-doped tapered fiber can serve as the primary power amplifier stage for an all-fiber and polarization-maintained picosecond pulse laser system. Here, we report a high-power narrow-linewidth amplifier stage by using the Yb-doped tapered fiber. In the regime, we have demonstrated amplification of 201.4 ps pulses centered at 1031.4 nm with a spectral width of 0.54 nm to 105 W average power at a repetition rate of 29.3 MHz. The picosecond pulses had a high beam quality with a measured M2 value of 1.36 ∼ 1.51, and the optical-to-optical conversion efficiency reached 56 %. To the best of our knowledge, this is the first demonstration of a high-power amplifier based on Yb-doped tapered fiber, capable of amplifying hundreds of picosecond pulses beyond the hectowatt-level average power, while maintaining high beam quality. This achievement highlights the immense potential of Yb-doped tapered fiber in the field of picosecond pulse power amplification. At last, we have refined the model for the transmission and amplification of picosecond pulses in Yb-doped tapered optical fibers, thereby enhancing simulation accuracy by 8 % and providing valuable references for the in-depth research of tapered fiber pulse amplifiers.

Kw-Level, Narrow-Linewidth Linearly Polarized All-Fiber Amplifier Based on Homemade Yb-doped Aluminosilicate Polarization-Maintaining Fiber

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

Cholecystokinin-coupled intracellular signaling in human gallbladder muscle.

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

Yb-Doped Aluminophosphosilicate Laser Fiber

Narrow-linewidth high-efficiency single-frequency ytterbium-doped fiber laser with highly linear polarization at 1064 nm

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

Double-clad large-mode-area polarization-maintaining ytterbium doped photonic crystal fiber

Towards tapered Yb-doped fiber-based narrow linewidth single-mode fiber laser with high signal to Raman ratio

1030 nm high power polarization maintained fiber laser with narrow linewidth and near diffraction limited beam quality

Kw-Level 1030 Nm Polarization-Maintained Fiber Laser with Narrow Linewidth and Near-Diffraction-limited Beam Quality.

3.38 kW all-fiberized narrow linewidth fiber laser based on active polarization control using RMS-Prop algorithm

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Hundred Nano-Joules Polarization-Maintaining Yb-Doped Fiber Femtosecond Laser Amplification System

Yb-doped large-mode-area laser fiber fabricated by halide-gas-phase-doping technique

Hundreds of picosecond pulses amplifier based on Yb-doped tapered fiber for the generation of 100 W average output power

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

A 5 kW Nearly-Single-Mode Monolithic Fiber Laser Emitting at ~1050 nm Employing Asymmetric Bi-Tapered Ytterbium-Doped Fiber

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

Wavelength-tunable 1104 Nm Nonlinear Amplifier Loop Mirror Laser Based on a Polarization-Maintaining Double-Cladding Fiber.