Abstract:To regulate multiple strengthening behaviors of as-cast high entropy alloys (HEAs) with a single phase face centered cubic (FCC) structure, the Mo element has been alloyed to the non-equiatomic CoCrFeNi HEA. Co30Cr30(FeNi)(40-x)Mo-x (x = 0, 2, 4, 6, 8, and 10 at%, hereinafter, simplified as HMo0, HMo2, HMo4, HMo6, HMo8, and HMo10, respectively) HEAs were prepared. The microstructure, tensile properties, and deformation behavior of as-cast alloys were investigated. The results show that the phase composition of HMo0-HMo4 is a single phase solid solution. The microstructure transforms from single phase FCC to FCC and & USigma; dual phases when Mo content is more than 4 at%. The morphology of sigma phase changes from a dispersed rod-like structure to a network structure. Md value is utilized to predict the formation of sigma phase. Mo elements with large atomic size cause severe lattice distortion and reduce stacking fault energy (SFE) in the FCC matrix phase. The yield strength increases gradually from 227 MPa to 688 MPa with the increase of Mo content. HMo4 has high strain hardening ability to realize the synergy of tensile strength and plasticity of 689 MPa and 102.43%. HMo6 has high yield strength (486 MPa) and tensile strength (770 MPa), but without causing serious embrittlement (43.91%). The improvement of yield strength is attributed to solid solution strengthening and precipitated strengthening. The twins and SFs are activated due to the low SFE in HMo4. The dislocation movement is further hindered and the dislocation mean-free path is reduced due to the increase of twin boundary, which contributes to high strain hardening ability. For dual-phase alloy, the dispersed hard sigma phase effectively impedes dislocation movement, causing stress concentration and crack initiation within the sigma phase. The crack propagation is passivated in the soft FCC matrix to maintain a certain plasticity. Excessive network sigma phases damage plasticity. (C) 2022 Published by Elsevier B.V.

Strengthening mechanism of CoCrNiMox high entropy alloys by high-throughput nanoindentation mapping technique

Mo Content-Dependent Hardness and Microstructural Evolution of CoCrNiMox Medium Entropy Alloys

Mo content-dependent hardness and microstructural evolution of CoCrNiMo x medium entropy alloys

Synergistic effect of Nb and Mo alloying on the microstructure and mechanical properties of CoCrFeNi high entropy alloy

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Effect of Mo Content on Microstructure and Mechanical Properties of CoCrFeNi Series High-entropy Alloys

Strengthening FCC-CoCrFeMnNi High Entropy Alloys by Mo Addition

Effects of Mo Element on Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloys

Microstructure and mechanical properties of CoCrFeNiW high entropy alloys reinforced by μ phase particles

Microstructure Evolution and Strengthening Mechanism of AlCrFe2NiCuMox High Entropy Alloys

Hardening-softening of Al 0.3 CoCrFeNi high-entropy alloy under nanoindentation

Precipitation Phase and Twins Strengthening Behaviors of As-Cast Non-Equiatomic CoCrFeNiMo High Entropy Alloys

Unique nanostructures and deformation mechanisms in a high-entropy alloy nanolaminates

High-throughput experimental study on the microstructural and compositional variations of mechanical properties for AlCoCrFeNi high entropy alloys

Improving Mechanical Properties of Co-Cr-Fe-Ni High Entropy Alloy via C and Mo Microalloying

Composition Design Study of Strong and Ductile Mo-alloyed CoCrNi Medium-Entropy Alloys

Effect of Annealing Temperature on the Microstructure and Mechanical Properties of CoCrFeNiNb0.2Mo0.2 High Entropy Alloy

Microstructure and Mechanical Properties of New AlCo<sub>x</sub>CrFeMo<sub>0.5</sub>Ni High-Entropy Alloys

Microstructure and mechanical properties of CoCrNi-Mo medium entropy alloys: Experiments and first-principle calculations

Strengthening CoCrFeNi High-Entropy Alloy by Laves and Boride Phases

Deciphering the effect of W and Mo co-additions on recrystallization behavior and strengthening mechanism of CrCoNi medium entropy alloy