Abstract:Eutectic high entropy alloys are noted for their excellent castability and comprehensive mechanical properties. The excellent mechanical properties are closely related to the activation and evolution of deformation mechanisms at the atomic scale. In this work, AlCoCrFeNi 2.1 alloy is taken as the research object. The mechanical behaviors and deformation mechanisms of the FCC and B2 single crystals with different orientations and the FCC/B2 composites with K-S orientation relationship during nanoindentation processes are systematically studied by molecular dynamics simulations. The results show that the mechanical behaviors of FCC single crystals are significantly orientation-dependent, meanwhile, the indentation force of [110] single crystal is the lowest at the elastic–plastic transition point, and that for [100] single crystal is the lowest in plastic deformation stage. Compared with FCC, the stress for B2 single crystals at the elastic–plastic transition point is higher. However, more deformation systems such as stacking faults, twins and dislocation loops are activated in FCC single crystal during the plastic deformation process, resulting in higher indentation force. For composites, the flow stress increases with the increase of B2 phase thickness during the initial stage of deformation. When indenter penetrates heterogeneous interface, the significantly increased deformation system in FCC phase leads to a significant increase in indentation force. The mechanical behaviors and deformation mechanisms depend on the component single crystal. When the thickness of the component layer is less than 15 nm, the heterogeneous interfaces fail to prevent the dislocation slip and improve the indentation force. The results will enrich the plastic deformation mechanisms of multi-principal eutectic alloys and provide guidance for the design of nanocrystalline metallic materials.

High-throughput experimental study on the microstructural and compositional variations of mechanical properties for AlCoCrFeNi high entropy alloys

Macro-micro Analysis of Mechanical Properties of Al0.6CoCrFeNi High-Entropy Alloy Particle-Reinforced Al-based Composites

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Study on strength and toughness of FeCoCrNiAlx high entropy alloy

Molecular Dynamics Simulations of Micromechanical Behaviours for AlCoCrFeNi2.1 High Entropy Alloy during Nanoindentation

Microstructure evolution and mechanical properties of CoCrFeNiAl0.3 high entropy alloy produced by ball milling in combination with thermomechanical consolidation

Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method

Microstructure and properties of AlCrFeNiCoCu high entropy alloy prepared by powder metallurgy

Effects of Al Addition on Microstructure and Mechanical Properties of Alxcocrfeni High-Entropy Alloy

Microstructure and Mechanical Property of As-Cast, -Homogenized, and -Deformed AlxCoCrFeNi (0≤x≤2) High-Entropy Alloys

Effects of Co/Ni ratio on microstructure and mechanical properties of as-cast Cr-Fe-Ni-Co-Al-Si-Ti-Cu high entropy alloys

Microstructures and mechanical properties of the precipitation strengthened Al0.4Cr0.7FexNi2V0.2 high entropy alloys

Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy

Microstructure and mechanical properties variation with Ni content in Al0.8CoCr0.6Fe0.7Nix (x = 1.1, 1.5, 1.8, 2.0) eutectic high-entropy alloy system

Core-shell structure mediated microstructure and mechanical properties of high entropy alloy CoCrFeNi/Al composites

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Study on the strengthening mechanism of AlCoCrFeNi2.1 eutectic high-entropy alloy

Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys

Microstructural evolution, bonding mechanism and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy joint fabricated via diffusion bonding

Annealing-induced multi-heterogeneous microstructure strengthening in FeCoCrNiMo 0.2 high-entropy alloys