Abstract:Due to their significant performance, Phase-Shifted Full-Bridge Converters (PSFBCs) have gained widespread adoption in medium- and high-power applications. The performance of a PSFBC is greatly influenced by its magnetic components, namely the transformer and resonance inductor. To address these challenges, this paper proposes a parameter optimization of magnetic components for PSFBCs, specifically the transformer turns ratio and resonance inductor value, to enhance conversion efficiency and minimize operational loss. A digital twin of PSFBCs enabling a more accurate loss estimation is proposed to achieve this objective. The proposed loss estimation method precisely calculates the effective and circulation intervals and the corresponding current points of the primary-side transformer current, resulting in improved accuracy. By leveraging the digital twin, the effects of transformer turns ratio and resonant inductor value on the conversion efficiency of a PSFBC can be efficiently simulated. This facilitates the parameter optimization of magnetic components, thereby minimizing operational losses across different application scenarios. This paper also designs and implements a PSFBC prototype with a rated input voltage of 380 V, output voltage of 24 V, and output current of 20 A. The experimental results show the influences of transformer turns ratio and resonant inductor value on the PSFBC and validate the proposed digital twin. The proposed parameter optimization of magnetic components is further evaluated across two application scenarios with varying utilization rates. The simulation results indicate a reduction of approximately 14% in operational loss per hour after applying the parameter optimization of magnetic components for the PSFBC used as a battery charger. The results demonstrate the effectiveness and practicality of the proposed digital twin in designing PSFBCs.

Parameter Identification Method Based on Digital Twin of Boost Converter

Modeling and Parameter Identification of DC/DC Converters in Both CCM and DCM Mode

Parameter Identification Method for Converter Controller of DFIG Based on Measurement Signal Disturbance

Parameter Identification of Power Electronic Circuits Based on Hybrid Model

PARAMETER IDENTIFICATION OF DC/DC POWER ELECTRONIC CIRCUITS BASED ON HYBRID SYSTEM MODEL

ON-LINE IDENTIFICATION OF POWER SYSTEM DYNAMIC EQUIVALENT Part Two Parameter Estimation & Simulation

Analysis on the Identification of Doubly Fed Induction Generator

Model parameter identification of DFIG based on short circuit current

Identification of DFIG parameters based on improved PSO algorithm

Digital Twin Based Condition Monitoring for High Power Converters

A Digital Twin Based Estimation Method for Health Indicators of DC–DC Converters

Recursive Least Square Method Based Parameter Identification of Steam Turbine Digital Electric-Hydraulic Governing System

Research on Parameter Identification of Buck Circuit

The Parameter Identification Method of Steam Turbine Nonlinear Servo System Based on Artificial Neural Network

Parameter Identification Of Inverter-Fed Induction Motors: A Review

Digital Twin Approach Enables Switching Converter Adaptive Control for All-Electric Ship Power Distribution System

A real-time digital twin approach on three-phase power converters applied to condition monitoring

Control Parameter Identification in Grid-side Converter of Directly Driven Wind Turbine Systems

Research on Establishment and Application of Digital Twin for a Phase-Shift Full-Bridge Current Doubling Rectifier Converter

Parameter Optimization of Magnetic Components for Phase-Shifted Full-Bridge Converters Using a Digital Twin

Parameter Identification of DFIG Converter Control System Based on WOA