Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Analysis and Compensation of Bias Drift of Force-to-Rebalanced Micro-Hemispherical Resonator Gyroscope Caused by Assembly Eccentricity Error

Compensation of Assembly Eccentricity Error of Micro Hemispherical Resonator Gyroscope

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

Bias Modulation of Force-to-Rebalanced Micro Hemispherical Resonator Gyroscope Based on Mode-Rotation

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

Modeling and Compensation of Assembly Inclination Error of Micro Hemispherical Resonator Gyroscope under Force-to-Rebalance Mode

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Rate Integrating Hemispherical Resonator Gyroscope Detection Error Analysis and Compensation

Modeling, Characterization, and Compensation of Detection and Actuation Coupling Errors for Whole-Angle Micro Hemispherical Resonant Gyroscope

Self-Excitation Enabled Decoupling, Calibration, and Compensation of Errors for Whole-Angle Hemispherical Resonator Gyroscope

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

Precision Enhancement by Compensation of Hemispherical Resonator Gyroscope Dynamic Output Errors.

Fast Identification and Compensation for Actuation Electrode Errors of Rate Integrating Gyroscopes

A Rate Hemispherical Resonator Gyroscope with Bias Stability of 0.0056°/h with Compensation of Phase Delay

Modeling, Identification and Compensation for Assembly Error of Whole-Angle Mode Hemispherical Resonator Gyro

Force to Rebalance Control of HRG and Suppression of Its Errors on the Basis of FPGA

High-precision Identification and Compensation of Nonlinear Error in Hemispherical Resonator Gyro

Identification and Compensation of Gain Mismatches for Whole-Angle Microhemispherical Resonator Gyroscope Based on Modal Reversal

Mems Gyroscope Bias Drift Self-Calibration Based On Noise-Suppressed Mode Reversal

Identification and Compensation Method of Unbalanced Error in Driving Chain for Rate-Integrating Hemispherical Resonator Gyro