Abstract:With the emerging necessity to convert our current fossil fuel-based energy conversion systems into systems converting renewable energy resources comes the need for enhanced scientific research on biomass and anthropogenic waste fuels. Thermochemical calculations based on the properly evaluated thermodynamic data represent a potent precursor to estimate the potentials and risks of thermal conversion of biomass fuels in industrial plants. For our purpose, thermochemical calculations are performed to analyze the chemical environment in the ash fraction of different biomass fuels. As biomass fuels display a wider range of ash-forming elements, both qualitatively and quantitatively, it is essential to obtain specific thermodynamic information for each fuel individually. The aim is to predict and possibly inhibit process-disrupting events, e.g., agglomeration, deposition, or corrosion, and instead improve the ash properties so that valuable ash fractions can alternatively be produced. Within our projects, we analyze natural resources, such as agricultural crops and residues, and waste streams, such as animal manures and sewage sludge, but also mixtures of other wastes and natural resources. A recent focus was set on the speciation of P and K in the analyzed ashes since the fate of these elements determines the possibility of ash recycling as fertilizer or as fertilizer precursor. Our analysis methodology covers theoretical thermodynamic equilibrium calculations and lab-scale experiments. This presentation aims to highlight our approach in the prediction of ash compositions and the characteristics of different biomass fuels using thermodynamic equilibrium calculations. The results obtained by these calculations help in the experimental design and in the interpretation of the experimental results. Essential limitations in the comparability with practical setups were identified, which have to be kept in mind and should be dealt with. One way of facilitating future approaches via thermodynamic equilibrium calculations could be a standardized methodology, e.g., a hierarchical structure in the parameter specification of the modeled practical system. Figure 1: Fuel fingerprint of the fuels and fuel mixtures used in the thermochemical equilibrium calculations. Based on the individual fuel compositions and the gas conditions (combustion/gasification) the melting behavior, the ash speciation at the process temperature, and the phases formed by equilibrium precipitation were calculated.

Generic approach for the modeling of liquefied thermochemical products and biomass heat of formation. Case study: HTL biocrude, Pyrolysis oil and assessment of energy requirements

Thermodynamic Analysis of Fischer-Tropsch Fuels from Biomass

Two-Stage Global Biomass Pyrolysis Model for Combustion Applications: Predicting Product Composition with a Focus on Kinetics, Energy, and Mass Balances Consistency

Development and Comparison of Thermodynamic Equilibrium and Kinetic Approaches for Biomass Pyrolysis Modeling

Thermochemical equilibrium modeling of ash transformation during the thermal conversion of different biomass types with a focus on the speciation of P and K

Insight into kinetic and Thermodynamic Analysis methods for lignocellulosic biomass pyrolysis

Simulation of Biomass Gasification and Application in Pilot Plant

Relationships between Biomass Composition and Liquid Products Formed via Pyrolysis

Aspen Plus® Modeling and Simulation of an Industrial Biomass Direct Liquefaction Process

Biomass to Biofuels Using Hydrothermal Liquefaction: A Comprehensive Review

Estimation of Fuel Properties for the Heavy Fraction of Biomass Pyrolysis Oil Consisting of Proposed Structures for Pyrolytic Lignin and Humins

Experimental and modeling investigation on pyrolysis of agricultural biomass residues: Khat stem and coffee husk for bio-oil application

A hybrid kinetic and optimization approach for biomass pyrolysis: The hybrid scheme of the isoconversional methods, DAEM, and a parallel-reaction mechanism

Simulation of biocrude production from P. tricornutum, S. platensis, and C. vulgaris using Aspenplus®

Process Simulation and Economic Analysis of Producing Liquid Transportation Fuels from Biomass

Hydrothermal co-liquefaction of microalgae, sugarcane bagasse, brewer's spent grain, and sludge from a paper recycling mill: Modeling and evaluation of biocrude and biochar yield

Hydrothermal Liquefaction of Biomass in Hot-Compressed Water, Alcohols, and Alcohol-Water Co-solvents for Biocrude Production

A comparative thermodynamic assessment of microwave-assisted and conventional pyrolysis of biomass in poly-generation systems using coupled numerical and process simulations

Analysis of Pyrolysis Kinetic Parameters Based on Various Mathematical Models for More than Twenty Different Biomasses: A Review

Modelling and Validating the Nonthermal Plasma Parameters for Producing Liquid Hydrocarbon from Solid Polyolefin Wastes

Molecular characterisation of biomass pyrolysis oil and petroleum fraction blends