Abstract:Bio-oils obtained by thermochemical or biochemical conversion of biomass represent a promising source of energy to complement fossil fuels, in particular for maritime or air transport for which the use of hydrogen or electricity appears complicated. As these bio-oils are very rich in water and heteroatoms, additional treatments are necessary before they can be used as biofuel. In order to improve the efficiency of these treatments, it is important to have a thorough knowledge of the composition of the bio-oil. The characterization of bio-oils is difficult because they are very complex mixtures with thousands of compounds covering a very wide range of molecular weight and polarity. Due to the high degree of orthogonality between the two chromatographic dimensions, the on-line combination of reversed-phase liquid chromatography and supercritical fluid chromatography (on-line RPLC x SFC) can significantly improve the characterization of such complex matrices. The hyphenation was optimized by selecting, in SFC, the stationary phase, the co-solvent, the make-up solvent prior to high resolution mass spectrometry (HRMS) and the injection solvent. Additionally, a new interface configuration is described. Quality descriptors such as the occupation of the separation space, the peak shapes and the signal intensity were considered to determine the optimal conditions. The best results were obtained with bare silica, a co-solvent composed of acetonitrile and methanol (50/50, v/v), a make-up solvent composed of methanol (90%) and water (10%) with formic acid (0.1%), an addition of co-solvent through an additional pump for SFC separation in a 2.1 mm column, and an hydro-organic solvent as injection solvent. The optimized setup was used to analyze two microalgae bio-oils: the full bio-oil coming from hydrothermal liquefaction and Soxhlet extraction of microalgae, and the gasoline cut obtained after distillation of the full bio-oil. Results in on-line RPLC x SFC-qTOF were particularly interesting, with very good peak shapes and high reproducibility. Moreover, the high degree of orthogonality for microalgae bio-oils of RPLC and SFC was highlighted by the very large occupation of the separation space. Isomeric profiles of compound families could be obtained in RPLC x SFC-qTOF and many isomers not separated in SFC alone were separated in RPLC and vice versa, thus showing the complementarity of the two chromatographic techniques.

Molecular characterisation of biomass pyrolysis oil and petroleum fraction blends

Comparison of lignocellulosic-based biomass pyrolysis processes by multi-scale molecular characterization

Combination of Integrated Machine Learning Model Frameworks and Infrared Spectroscopy Towards Fast and Interpretable Characterization of Model Pyrolysis Oil

Bio-Oil Production from Multi-Waste Biomass Co-Pyrolysis Using Analytical Py–GC/MS

Characterization of Biomass Pyrolysis Oils by Diffusion Ordered NMR Spectroscopy

Character and Composition Analysis of Distilling Fractions from Sewage Sludge Pyrolysis Oil

Fast Characterization of Biomass Pyrolysis Oil Via Combination of Atr-Ftir and Machine Learning Models

Experimental analysis and numerical simulation of biomass pyrolysis

Characterization and Comparison of Fast Pyrolysis Bio-oils from Pinewood, Rapeseed Cake, and Wheat Straw Using 13C NMR and Comprehensive GC × GC

On-line reversed-phase liquid chromatography x supercritical fluid chromatography coupled to high-resolution mass spectrometry: A powerful tool for the characterization of advanced biofuels

Relationships between Biomass Composition and Liquid Products Formed via Pyrolysis

Exploring molecular composition of upgraded pyrolysis bio-oil using GC×GC-(EI/PI)-TOF MS with different column set-ups

Advances in the Characterization Methods of Biomass Pyrolysis Products

Investigating the characterisation, kinetic mechanism, and thermodynamic behaviour of coal-biomass blends in co-pyrolysis process

Evaluating the blending potential of two different biomass via co-pyrolysis as sustainable pathway using RSM optimization for bioenergy and bio char production

Design of bio-oil additives via molecular signature descriptors using a multi-stage computer-aided molecular design framework

Estimation of Fuel Properties for the Heavy Fraction of Biomass Pyrolysis Oil Consisting of Proposed Structures for Pyrolytic Lignin and Humins

Effect of final pyrolysis temperature on the composition and structure of shale oil: Synergistic use of multiple analysis and testing methods

Using evolutionary machine learning to characterize and optimize co-pyrolysis of biomass feedstocks and polymeric wastes

Molecular weight distribution of raw and catalytic fast pyrolysis oils: comparison of analytical methodologies

Research on Characteristic of Biomass Pyrolysis Oils and Emulsion Oil