Progress in selective catalytic oxidation of ammonia to nitrogen
Hongchun Sun,Zhenping Qu
DOI: https://doi.org/10.1360/TB-2020-0790
2020-01-01
Abstract:The removal of ammonia (NH3) is a very important environment issue because NH3 gas is harmful to human health and environment. The selective catalytic oxidation (SCO) of NH3 to nitrogen (N-2) is one of the most effective technologies, and has attracted intensity attention in recent years. Various types of materials have been reported as catalysts for ammonia SCO reaction over the past few years, including supported noble metals (Pt, Pd, Ru, Au, Ir, Ag, etc.), supported transition-metal oxides (Fe, Co, Mn, V, Ni, Cu, etc.), and modified zeolites (ZSM-5, MCM-41, SSZ-13. SAPO-34, etc.). Each type of catalysts has both advantages and disadvantages. Noble metals show the high activity at low temperature, while deeper oxidation of NH3 to nitrogen oxides and high cost limit their widespread use. Transition-metal oxides and modified zeolites catalysts show higher N-2 selectivity. however, need higher operation temperatures than noble metal catalysts. The Ag-based catalyst depends on the particle size and valence state of Ag species for the NH3-SCO activity and N-2 selective. Therefore, much effort has been devoted to alter the particle size and valence state of Ag species, such as the support, modification/doping, atmosphere (H-2 or O-2) pretreatment, et al. The Cu-based catalyst mainly include supported catalysts and composite oxide catalysts. The activity and selectivity of Cu-based catalysts are mainly influenced by the Cu loading, different precursors, the preparation method and calcination temperatures, which are decisive to control the texture features and dispersion states of CuO species. Nowadays, three major mechanisms have been investigated and reported: (1) The imide mechanism. (2) the hydrazine mechanism, and (3) the internal selective catalytic reduction (i-SCR) mechanism. The NH3-SCO mechanisms over Ag and Cu based catalysts also follows the i-SCR mechanisms. The concept of bifunctional catalysts is based on the iSCR mechanism of NH3-SCO, such as Pt-Al2O3 + Fe/Cu-zeolite catalyst. Finally, we look forward to the future research direction and development trend. The focus of future research is to modify the support of Ag-based catalysts so that they have a better ability to disperse Ag. At the same time, the ratio of Ag-0 to silver oxide should be adjusted to make it have better catalytic activity and N-2 selectivity. For Cu catalysts, through element doping, carrier modification and the formation of composite oxide catalysts with special structures, their catalytic activity and N-2 selectivity are further improved. It is coupled with the NH3-SCR reaction to solve the NH3 slip, such as NH3-SCR device of the diesel engine. The hydrothermal stability of catalyst and the real atmosphere (SO2, CO2, H2O, NO, etc.) should be considered in the NH3-SCO reaction. The SCO will be an importantly potential technique for the removal of NH3 in the exhaust gas in the near future.