Abstract:Selective catalytic NH3-to-N2 oxidation (NH3-SCO) is highly promising for abating NH3 emissions slipped from stationary flue gas after-treatment devices. Its practical application, however, is limited by the non-availability of low-cost catalysts with high activity and N2 selectivity. Here, using defect-rich nitrogen-doped carbon nanotubes (NCNT-AW) as the support, we developed a highly active and durable copper-based NH3-SCO catalyst with a high abundance of cuprous (Cu+) sites. The obtained Cu/NCNT-AW catalyst demonstrated outstanding activity with a T50 (i.e. the temperature to reach 50% NH3 conversion) of 174°C in the NH3-SCO reaction, which outperformed not only the Cu catalyst supported on N-free O-functionalized CNTs (OCNTs) or NCNT with less surface defects, but also those most active Cu catalysts in open literature. Reaction kinetics measurements and temperature-programmed surface reactions using NH3 as a probe molecule revealed that the NH3-SCO reaction on Cu/NCNT-AW follows an internal selective catalytic reaction (i-SCR) route involving nitric oxide (NO) as a key intermediate. According to mechanistic investigations by X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray absorption spectroscopy, the superior NH3-SCO performance of Cu/NCNT-AW originated from a synergy of surface defects and N-dopants. Specifically, surface defects promoted the anchoring of CuO nanoparticles on N-containing sites and, thereby, enabled efficient electron transfer from N to CuO, increasing significantly the fraction of SCR-active Cu+ sites in the catalyst. This study puts forward a new idea for manipulating and utilizing the interplay of defects and N-dopants on carbon surfaces to fabricate Cu+-rich Cu catalysts for efficient abatement of slip NH3 emissions via selective oxidation.

Elimination of NH 3 by Interfacial Charge Transfer over the Ag/CeSnO x Tandem Catalyst

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Synergistic Effect over CeSnO x Catalyst for the Selective Catalytic Oxidation of NH 3

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

Promoting Metal Oxides–zeolite Electron Interaction on MnCeOx/HY Catalyst for Boosting Nitrogen Oxides Reduction

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Remarkable Enhancement in the N-2 Selectivity of NH3-SCR over the CeNb3Fe0.3/TiO2 Catalyst in the Presence of Chlorobenzene

Discovering Surface Structure and the Mechanism of Graphene Oxide-Triggered CeO2-WO3/TiO2 Catalysts for NO Abatement with NH3

Low-temperature NH3 abatement via selective oxidation over a supported copper catalyst with high Cu+ abundance

Unraveling the synergy between MnOx and CeO2 in MnOx-CeO2 SCR catalysts based on experimental and DFT studies

Promotional Effects on NH3-SCR Performance of CeO2–SnO2 Catalysts Doped by TiO2: A Mechanism Study

Activating low-temperature NH3-SCR catalyst by breaking the strong interface between acid and redox sites: A case of model Ce2(SO4)3-CeO2 study

Pt/Al2O3@Ce/ZrO2-S bifunctional catalysts prepared by mechanically milling for selective catalytic oxidation of high-concentration ammonia

Orchestrating dual adsorption sites and unravelling Ce-Mn interaction and reaction mechanisms for efficient NH 3 -SCR

Discovering Surface Structure and the Mechanism of Graphene Oxide-Triggered CeO 2 –WO 3 /TiO 2 Catalysts for NO Abatement with NH 3

Unraveling the Complete Mechanism of the NH3-Selective Catalytic Reduction of NO over CeO2

Ag Catalysts Supported on CeO2, MnO2 and CeMnOx Mixed Oxides for Selective Catalytic Reduction of NO by C3H6

Ammonia Abatement via Selective Oxidation over Electron-Deficient Copper Catalysts

Modification of Cu/ZSM-5 Catalyst with CeO2 for Selective Catalytic Reduction of NOx with Ammonia

Remarkable enhancement in the N2 selectivity of NH3-SCR over the CeNb3Fe0.3/TiO2 catalyst in the presence of chlorobenzene

Structural Properties of PtCuO/Al2O3 surface catalyst for selective NH3 oxidation using operando spectroscopy