Abstract:For the traditional preparation method, it is challenging to fabricate a supported nickel catalyst with fine size at high loading. In this work, a group of La-modified mesostructured cellular foam (MCF)-derived nickel phyllosilicates was designed and synthetized by a hydrothermal method followed by an impregnation-modification of La2O3, whose Ni contents varied from 25.3 to 32.2 wt %. Both the special property of phyllosilicate and the addition of a La2O3 modifier played significant roles in achieving high Ni dispersion and excellent catalytic performance. The formed nickel phyllosilicate was beneficial to obtain small Ni nanoparticles (<5 nm) due to its strong metal-support interaction and high specific surface area; the addition of the La2O3 modifier could further reduce the Ni particle size and decrease the reduction difficulty of the fabricated samples. On the contrary, a large Ni particle size of 13.0 nm was observed on the impregnated Ni/MCF (N/M-Im) catalyst with a Ni content of 31.7 wt %. As a result, the nickel phyllosilicate catalyst showed higher catalytic activity than the impregnated one, and the La modifier could further improve the catalytic activity especially at low temperature (<400 °C). Among all catalysts, the modified phyllosilicate catalyst N/M-P-32-5L with 180 °C-32 h-hydrothermal treatment and La2O3 content of 5 wt % was the best owing to its small-sized Ni particles, high H2 and CO2 chemisorption capacity, large turnover frequency (TOF) value, and low activation energy of 69.83 kJ mol-1. In addition, the intermediates of formate and CO were detected through in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis. In a 100 h-lifetime test under harsh conditions and 600 °C-steam treatment, N/M-P-32-5L showed both high sintering resistance of Ni particles and high thermal stability without the collapse of pores as well as decrease of catalytic activity, which was attributed to the special physical and chemical properties of MCF-derived nickel phyllosilicate, strong metal-support interaction over the catalyst, and the promotion of the La2O3 modifier.

Modification of Silica Supported Nickel Catalysts with Lanthanum for Stability Improvement in Methane Reforming with CO2

Insight into exhaust gas-methane reforming over La 2 O 3 -modified Ni/Ca-Al for enhanced hydrogen-rich production

Studies on nickel-based catalysts for carbon dioxide reforming of methane

Lanthanum-mediated enhancement of nickel nanoparticles for efficient CO 2 methanation

High Performance of Mg–La Mixed Oxides Supported Ni Catalysts for Dry Reforming of Methane: the Effect of Crystal Structure

The Ni Catalyst Supported on the FSP-made Transition Metal (Co, Mn, Cu or Zn) Doped La2O3 Material for the Dry Reforming of Methane

Unveiling the catalytic performance of unique core-fibrous shell silica-lanthanum oxide with different nickel loadings for dry reforming of methane

Performance of Ni-Based Catalysts with La Promoter for the Reforming of Methane in Gasification Process

Specific Features Concerning the Mechanism of Methane Reforming by Carbon Dioxide over Ni/La2O3Catalyst

Catalytic conversion of methane and CO2 to synthesis gas over a La2O3-modified SiO2 supported Ni catalyst in fluidized-bed reactor

Lanthanum-Modified MCF-Derived Nickel Phyllosilicate Catalyst for Enhanced CO2 Methanation: A Comprehensive Study

Revolutionizing CH4-CO2 reforming: Resilient La2O3-Ni@MgAl2O4 catalyst with dual-function synergy

Facile synthesis of highly disperse Ni-Co nanoparticles over mesoporous silica for enhanced methane dry reforming

Ni/Al2O3-La2O3 catalysts synthesized by a one-step polymerization method applied to the dry reforming of methane: effect of precursor structures of nickel, perovskite and spinel

Influences of Ni Content on the Microstructural and Catalytic Properties of Perovskite LaNixCr1−xO3 for Dry Reforming of Methane

Enhancement of CO2 Methanation over La-Modified Ni/SBA-15 Catalysts Prepared by Different Doping Methods

Ordered mesoporous Ni-La2O3/Al2O3 catalysts towards efficient plasma-assisted dry reforming of methane

Co–Ni Alloy Supported on CeO2 As a Bimetallic Catalyst for Dry Reforming of Methane

Highly dispersed nickel-tuned silica lanthana catalyst: Interplay of morphology and textural properties for hydrogen-rich syngas through the carbon dioxide reforming of methane

Combined Carbon Dioxide Reforming and Partial Oxidation of Methane to Syngas over Ni−La<sub>2</sub>O<sub>3</sub>/SiO<sub>2</sub>Catalysts in a Fluidized-Bed Reactor

Role of Active Site and CO2‐Interacting Surface Species in Dry Reforming of Methane over Strontium Promoted Ni Catalyst Supported by Lanthanum‐Zirconia