Abstract:The tetraethyl orthosilicate is introduced into CZTSSe precursor solution as a source of silicon to partially substitute Sn with Si for fabrication of CZTSSe device, giving rise to favorable functions in terms of passivating SnZn defects and optimizing energy level alignment. Consequently, the CZTSSe device with 7% Si substitution acquires a PCE of 13.02% due to the enhancement of Voc. The SnZn defect passivation and heterojunction interface energetics‐modification are crucial for further improvement of open‐circuit voltage (Voc) and efficiency of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Herein, a simple but effective cation substitution strategy is reported to promote the performance of CZTSSe devices by simultaneously modifying the absorber and heterojunction interface. This is achieved by introducing the organic silicon salt C8H20O4Si into CZTSSe precursor solution as a source of silicon to partially substitute Sn with Si. Systematic studies reveal that there are two mechanisms synergistically contributing to the increase of efficiency: 1) This strategy can passivate the undesired SnZn defect in CZTSSe absorber more efficiently, leading to at least one order of magnitude lower SnZn defect density and beneficial carrier transport properties; 2) After Si incorporation, the conduction band minimum of the CZTSSe is upshifted, thus enlarging the bandgap, which ultimately optimizes the energy level structure at the CdS/CZTSSe interface and reduces interfacial energy loss by decreasing the carrier transport barrier. Consequently, the CZTSSe device with 7% Si substitution delivers a satisfactory efficiency of 13.02% owing to an increase in Voc. It is hoped the Si substitution strategy reported here can provide inspiration for developing advanced CZTSSe devices with broad application prospects.

Precursor Solution Chemistry Via Water Additive Enabling CZTSSe Solar Cells with over 12％Efficiency

Optimizing the Ratio of Sn4+ and Sn2+ in Cu2ZnSn(S,Se)4 Precursor Solution Via Air Environment for Highly Efficient Solar Cells

Improvement of grain growth and composition distribution of Cu2ZnSn(S,Se)4 by using chloride-based precursor solution

Regulating Hetero‐Nucleation Enabling Over 14% Efficient Kesterite Solar Cells

Novel non-hydrazine solution processing of earth-abundant Cu2ZnSn(S,Se)4 absorbers for thin-film solar cells

Optimization of DMSO-based Precursor Solution by H2O Additive for Performance Enhancement of Kesterite Photovoltaic Devices

Coordination Engineering of Cu-Zn-Sn-S Aqueous Precursor for Efficient Kesterite Solar Cells

Synergistic Improvement of Perovskite Film Quality for Efficient Solar Cells Via Multiple Chloride Salt Additives

Impact of Sn4+/Sn2+ Ratio in the Precursor Solution on the Performance of CZTSSe Solar Cell

Synergistic Crystallization Modulation and Defects Passivation in Kesterite via Anion-Coordinate Precursor Engineering for Efficient Solar Cells

Fabrication of a High-Quality Cu2ZnSn(S,Se)4 Absorber Layer Via an Aqueous Solution Process and Application in Solar Cells.

Solution-processed highly efficient Cu2ZnSnSe4 thin film solar cells by dissolution of elemental Cu, Zn, Sn, and Se powders.

Passivating SnZn Defect and Optimizing Energy Level Alignment via Organic Silicon Salt Incorporation toward Efficient Solution‐Processed CZTSSe Solar Cells

Eliminating Cracking Morphology of Solution-Processed CZTSSe Absorbers by Sn-rich Composition Engineering

Controlling selenization equilibrium enables high-quality Cu2ZnSn(S, Se)4 absorbers for efficient solar cells

Realization of 11.5% Efficiency Cu2ZnSn(S,Se)4 Thin‐Film Solar Cells by Manipulating the Phase Structure of Precursor Films

Suppressing Deep-Level Trap Toward over 13% Efficient Solution-Processed Kesterite Solar Cell

Suppressing Surface and Bulk Effect Enables High Efficiency Solution-Processed Kesterite Solar Cells

Enhancement of power conversion efficiency of Ag-substituted Cu2ZnSn(S,Se)4 solar cells via tuning Cu2+/(Cu++Cu2+) percentage in precursor solution

CZTSSe solar cell with an efficiency of 10.19% based on absorbers with homogeneous composition and structure using a novel two-step annealing process

8.36% Efficient CZTS Solar Cells on Transparent Electrode Via Solution Processing