Abstract:Boron (B), normally present in ground water and sea water, is a vital micronutrient for plants, but is also toxic in excessive amounts. Under typical conditions, aqueous boron is present as boric acid (H3BO3), which is uncharged, making B particularly challenging to remove by mechanisms commonly applicable to removal of trace constituents. Adsorption of B onto aluminum hydroxide solids (Al(OH)3(s)) generated using aluminum-based electrocoagulation (EC) is a promising strategy for B removal. Infrared spectroscopy analysis indicated complexation of B(OH)3 with aluminum hydroxide solids via surface hydroxyl groups, while X-ray and infrared spectroscopy results indicated that the structure of the Al(OH)3(s) was influenced both by EC operating conditions and by water quality. A linear adsorption model predicted B removal well when initial concentrations were lower than 50 mg/L, but fit the experimental data poorly at higher initial B concentrations. The Langmuir adsorption model provided a good fit for a broader range of initial B concentrations (5-1000 mg/L). Factors affecting B adsorption during the EC process, including current intensity, Al dissolution rate, boron concentration, pH, and total dissolved solid (TDS), were investigated. Increasing current intensity initially led to a higher Al dissolution rate, and therefore higher B adsorption, but there was a limit, as further increases in current intensity caused rapid formation of Al(OH)3(s) having a large particle size and a low capacity to complex B. Boron removal decreased as its concentration increased. The best removal of B occurred at pH 8, corresponding to a slightly positive zeta potential for aluminum hydroxide and a small but significant fraction of negatively charged B species. Higher TDS concentrations facilitated the use of higher current intensities, i.e., the limit on the effective Al dissolution rate increased with increasing TDS. Two real water samples (river water and oilfield produced water) spiked with B were treated using EC, resulting in up to 50% B removal from river water (C0 = 10 mg/L, current = 0.2 A) in 2 h, and 80% B removal from produced water (C0 = 50 mg/L, current = 1.0 A) in 2 h.

Adsorption and Electro-Assisted Method Removal of Boron in Aqueous Solution by Nickel Hydroxide

Highly efficient scavenging of Ni(II) by porous hexagonal boron nitride: Kinetics, thermodynamics and mechanism aspects

Facile Synthesis of Core-Shell Magnetic Iron Oxide@SiO2-NH2 Nanoparticles and Their Application in Rapid Boron Removal from Aqueous Solutions

Effective Removal of Boron from Aqueous Solutions by Inorganic Adsorbents: A Review

Enhanced boron removal without pre-pH adjustment via redox-mediated electrodialysis assisted by ion-exchange resins

Materials for Boron Adsorption

Multiscale, porous anion-exchangeable sponge for sustainable and convenient boron removal

Boronization of Nickel Foam for Sustainable Electrochemical Reduction of Nitrate to Ammonia

Boron removal by electrocoagulation: Removal mechanism, adsorption models and factors influencing removal

Boron Removal in Aqueous Solutions Using Adsorption with Sugarcane Bagasse Biochar and Ammonia Nanobubbles

An updated review on boron removal from water through adsorption processes

A novel recyclable absorption material with boronate affinity

Enhancement mechanism for boron removal at high anodic polarization potential during electrocoagulation using iron-based materials

Boron removal using enhanced electrocoagulation (EEC) with hydrogen peroxide under natural conditions to prepare drinking water

A Spherical N-Methyl-D-Glucamine-Based Hybrid Adsorbent for Highly Efficient Adsorption of Boric Acid from Water

Interlayer intercalation of Li/Al-LDHs responsible for high-efficiency boron extraction

Sustainable boron removal from aqueous solutions using pomegranate peel adsorbents: A comprehensive study on isotherms, kinetics, and thermodynamics

Electrospun PAN-Based Carbon Nanofibers for Aqueous Boron Recovery

High-efficiency electrochemical nitrate reduction to ammonia via boron-doped hydroxyl oxide cobalt induced electron delocalization

A functionalized bio-based material with abundant mesopores and catechol groups for efficient removal of boron

A novel study on the adsorption of low concentration Cd(II) and Ni(II) using porous boron nitride: effectiveness, coexisting anion interference, and regeneration