Abstract:Electrochemical nitrate reduction is considered a promising energy efficient approach to remove environmentally harmful nitrate from various types of wastewater while simultaneously producing a product with high added value: ammonia. One important factor to be accounted for is the choice of the catalyst, which is required not only to accelerate nitrate reduction but also to direct the product selectivity of the electrolysis toward ammonia production. To this end, herein, we demonstrate the fabrication of novel Ni foam catalysts produced by means of a dynamic hydrogen bubble template and additive assisted electrodeposition process. The resulting 3D foam morphology of the catalyst is demonstrated to crucially govern its overall catalytic performance. Post-electrolysis cross-sectional SEM-EDX analysis (K mapping) demonstrated complete wetting of the 3D foam structure by the electrolyte. Ni foams deposited within 20 s exhibited outstanding selectivity toward nitrate electroreduction: more than 95% of the Faradaic efficiency of ammonia production was achieved in the particularly low potential range from -0.1 to -0.3 V vs. RHE. Hydrogen was found to be the only minor by-product of the nitrate reduction. Intriguingly, no other nitrogen containing products (e.g., NO, N2O, and N2) formed during electrolysis, thus indicating a highly efficient nitrate-to-ammonia conversion process. This significant improvement over the use of a planar Ni foil reference (33% FE at -0.3 V vs. RHE) is attributable to (i) the effective suppression of the HER in this potential regime and (ii) a high surface density of active sites for the nitrate reduction formed during Ni foam electrodeposition under extreme experimental conditions, e.g., at an applied geometric current density of -3 A cm-2. Trapping intermediates inside the primary macroporosity contributed to the excellent catalytic performance of the Ni foams. Identical location (IL) SEM analyses demonstrated the excellent structural stability of the novel Ni foam during extended catalyst stressing. These superior characteristics have not previously been reported for Ni and Ni rich catalysts, thus making the novel foam type of catalyst a highly promising candidate for truly selective and energy efficient nitrate-to-ammonia electroreduction and a promising alternative to mature copper-based catalysts.

Boronization of Nickel Foam for Sustainable Electrochemical Reduction of Nitrate to Ammonia

Modulation of Charge Distribution Enabling CuNi Nano-Alloys for Efficient Ammonia Oxidation Reaction to Nitrite Production

High-efficiency electrochemical nitrate reduction to ammonia via boron-doped hydroxyl oxide cobalt induced electron delocalization

Exclusive Nitrate to Ammonia Conversion Via Boron-Doped Carbon Dots Induced Surface Lewis Acid Sites

Beyond Copper: Novel Ni Foam Catalysts for Sustainable Nitrate to Ammonia Electroreduction

Amorphous nickel–iron hydroxide nanosheets for effective electroreduction of nitrate to ammonia

Copper-nickel-MOF/nickel foam catalysts grown in situ for efficient electrochemical nitrate reduction to ammonia

Interstitial Boron-Doped Nanoporous Palladium Film for Electro-Reduction of Nitrogen to Ammonia

Electrodeposited NiCoP on nickel foam as a self-supported cathode for highly selective electrochemical reduction of nitrate to ammonia

Elaborately tuning the electronic structure of single-atom nickel sites using nickel nanoparticles to markedly enhance the electrochemical reduction of nitrate into ammonia

In-situ formation of bismuth nanoparticles on nickel foam for ambient ammonia synthesis via electrocatalytic nitrogen reduction

Boron nanoclusters endowed NiFe layered double hydroxides with efficient bifunction toward ammonia oxidation reaction and hydrogen evolution reaction

Tailoring Ni 3d orbitals in Ni-Fe/Ni foam heterostructures for enhanced H* adsorption and boosted electrocatalytic nitrate reduction performance

Boron-doped carbon nanospheres for efficient and stable electrochemical nitrogen reduction

Ni nanoparticles-decorated biomass carbon for efficient electrocatalytic nitrite reduction to ammonia

Boron-iron nanochains for selective electrocatalytic reduction of nitrate

3D cauliflower-like Ni foam: a high-efficiency electrocatalyst for ammonia production via nitrite reduction

Achieving efficient and stable electrochemical nitrate removal by in-situ reconstruction of Cu2O/Cu electroactive nanocatalysts on Cu foam

Heterostructure engineered construction of N-doped CuO@Co3O4 for highly efficient electrocatalytic reduction of nitrate to ammonia

Synergizing Fe2O3 nanoparticles on single atom Fe-N-C for nitrate reduction to ammonia at industrial current densities

Metal–organic framework-derived Cu nanoparticle binder-free monolithic electrodes with multiple support structures for electrocatalytic nitrate reduction to ammonia