Abstract:In this study, the plasma graft polymerization technique was used to graft glycidyl methacrylate (GMA) onto polypropylene (PP) melt-blown fibers, which were subsequently aminated with N-methyl-D-glucamine (NMDG) by a ring-opening reaction, resulting in the formation of a boron adsorbent denoted as PP-g-GMA-NMDG. The optimal conditions for GMA concentration, grafting time, grafting temperature, and the quantity of NMDG were determined using both single factor testing and orthogonal testing. These experiments determined the optimal process conditions to achieve a high boron adsorption capacity of PP-g-GMA-NMDG. Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersion spectrum analysis (EDS), and water contact angle measurements were performed to characterize the prepared adsorbent. Boron adsorption experiments were carried out to investigate the effects of pH, time, temperature, and boron concentration on the boron adsorption capacity of PP-g-GMA-NMDG. The adsorption isotherms and kinetics of PP-g-GMA-NMDG for boron were also studied. The results demonstrated that the adsorption process followed a pseudo-second-order kinetic model and a Langmuir isothermal model. At a pH of 6, the maximum saturation adsorption capacity of PP-g-GMA-NMDG for boron was 18.03 ± 1 mg/g. In addition, PP-g-GMA-NMDG also showed excellent selectivity for the adsorption of boron in the presence of other cations, such as Na+, Mg2+, and Ca2+, PP-g-GMA-NMDG, and exhibited excellent selectivity towards boron adsorption. These results indicated that the technique of preparing PP-g-GMA-NMDG is both viable and environmentally benign. The PP-g-GMA-NMDG that was made has better qualities than other similar adsorbents. It has a high adsorption capacity, great selectivity, reliable repeatability, and easy recovery. These advantages indicated that the adsorbents have significant potential for widespread application in the separation of boron in water.

Materials for Boron Adsorption

Progress in Extractants for Boron Recovery from Salt-Lake Brine

A Spherical N-Methyl-D-Glucamine-Based Hybrid Adsorbent for Highly Efficient Adsorption of Boric Acid from Water

Effective Removal of Boron from Aqueous Solutions by Inorganic Adsorbents: A Review

Efficient Removal of Boron Acid by N-methyl-d-glucamine Functionalized Silica–polyallylamine Composites and Its Adsorption Mechanism

A novel recyclable absorption material with boronate affinity

Boron Adsorption Using NMDG-Modified Polypropylene Melt-Blown Fibers Induced by Ultraviolet Grafting

A new multi-hydroxyl methacrylate based adsorbent for boron removal from aqueous solutions

Sustainable boron removal from aqueous solutions using pomegranate peel adsorbents: A comprehensive study on isotherms, kinetics, and thermodynamics

An updated review on boron removal from water through adsorption processes

Preparation and application of porous functional polymers for boron removal in seawater desalination by a mild and free-organic solvents process

Preparation of Amino Propanediol Functionalized Boron-Chelating Resins and Application in Adsorption of Boric Acid

Boron recovery from salt lake brine, seawater, and wastewater – A review

Incorporation of N-Methyl-d-glucamine Functionalized Oligomer into MIL-101(Cr) for Highly Efficient Removal of Boric Acid from Water.

Cellulose-derived polyols as high-capacity adsorbents for rapid boron and organic pollutants removal from water

Boron removal by a composite sorbent: Polyethylenimine/tannic acid derivative immobilized in alginate hydrogel beads

Preparation and Performance Study of Boron Adsorbent from Plasma-Grafted Polypropylene Melt-Blown Fibers

Boron Removal in Aqueous Solutions Using Adsorption with Sugarcane Bagasse Biochar and Ammonia Nanobubbles

Boron continuous recovery from brines by the multicolumn simulated moving bed process with boron chelating resin

A functionalized bio-based material with abundant mesopores and catechol groups for efficient removal of boron

Electrospun PAN-Based Carbon Nanofibers for Aqueous Boron Recovery