Abstract:This study presents an innovative approach for boron removal from industrial wastewater, especially from coal-fired power plants and hydraulic fracturing processes, through an advanced electrocoagulation-flotation (ECF) method. This method, enhanced by the stepwise addition of anionic surfactants, effectively reduces the sludge-volume ratio (SVR) while ensuring efficient boron removal. Anionic surfactants, due to their compatibility with the positively charged boron‑aluminum hydroxide co-precipitates, enhance coagulation and solid-liquid separation. The research highlights the correlation between the hydrophobicity of the surfactant's carbon chain and reduced sludge volume and residual turbidity. Importantly, the stepwise addition of surfactants optimizes the dosage, maintaining low residual turbidity and SVR, even in high-conductivity (30.1 mS cm−1) wastewater from actual coal-fired power plants. Further, the study shows that longer reaction times and higher surfactant doses in a mono-polar electrode reactor can significantly improve boron removal and solid-liquid separation, marking a substantial advancement in wastewater treatment technologies. Boron is a common pollutant in wastewater of coal-fired power plants and the hydraulic fracturing process. It can be effectively removed by electrocoagulation (EC). However, the boron‑aluminum hydroxide particles after EC are too tiny to settle by sedimentation, and therefore, the sludge-volume ratio (SVR) is extremely high. By adding surfactants, the solid-liquid separation mechanism of EC can be shifted from settling to flotation (known as the electrocoagulation-flotation (ECF) process), effectively reducing the SVR without affecting boron removal. Due to the positively charged nature of boron‑aluminum hydroxide co-precipitates, anionic surfactants work better than cationic surfactants as coagulants. The higher the hydrophobicity of surfactant's carbon chain, the lower the sludge volume and residual turbidity. A stepwise addition method significantly reduced the surfactant dosage without causing an increase in the residual turbidity or SVR. The efficiencies of boron removal and solid-liquid separation by ECF in actual coal-fired power plant wastewater were significantly reduced due to the extremely high conductivity (30.1 mS cm−1). A stepwise addition method was also useful when treating real wastewater. The efficiencies of boron removal and solid-liquid separation were significantly be improved by a longer reaction time and a higher SDS dose by ECF with a mono-polar electrode reactor.

Boron removal using enhanced electrocoagulation (EEC) with hydrogen peroxide under natural conditions to prepare drinking water

Boron removal by electrocoagulation: Removal mechanism, adsorption models and factors influencing removal

Removal of Boron from Simulated Iraqi Surface Water by Electrocoagulation Method

Boron Removal from High Sulfate-Containing Coal-Fired Power Plant Wastewater by an Ultrasound/Bipolar Electrocoagulation Process with Aluminum Electrodes

Arsenic Removal in Synthetic Ground Water Using Iron Electrolysis

Treating boron-containing wastewater by electrocoagulation-flotation (ECF) process with the stepwise addition of anionic surfactants

Removal of arsenite using conventional and enhanced electrocoagulation with aeration and hydrogen peroxide up to drinking water quality standards

Enhanced boron removal without pre-pH adjustment via redox-mediated electrodialysis assisted by ion-exchange resins

Enhancement mechanism for boron removal at high anodic polarization potential during electrocoagulation using iron-based materials

Mechanisms of boron removal from hydraulic fracturing wastewater by aluminum electrocoagulation

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

Sustainable boron removal from aqueous solutions using pomegranate peel adsorbents: A comprehensive study on isotherms, kinetics, and thermodynamics

Effective boron removal from synthetic wastewater by multi-stage calcium-based chemical oxo-precipitation process

Investigation of Electrocoagulation Process for Efficient Removal of Bisphenol A from the Aqueous Environment: Promising Treatment Strategy

Concurrent Boron Removal from Reverse Osmosis Concentrated and Energy Production using Microbial Desalination Cell-Donnan Dialysis Hybrid System

Boron Removal from Aqueous Solution by Direct Contact Membrane Distillation

Highly Efficient Removal of Perfluorooctanoic Acid from Aqueous Solution by H2O2-enhanced Electrocoagulation-Electroflotation Technique

Electrocoagulation process using aluminum electrodes for treatment of baker's yeast industry wastewater

Highly efficient elimination of organic contaminants by boron-doped biochar modified dual-cathode electro-Fenton system

Hybrid multi-chamber system for enhanced removal of boron during water treatment/desalination without chemical usage

Inhibition of Bromate Formation During Drinking Water Treatment by Adapting Ozonation to Electro-Peroxone Process