Abstract:In order to improve the wear and corrosion resistance of Ti-6Al-4V, a novel beta-Ta2O5 nanoceramic coating was synthesised using reactive sputter deposition enabled by double glow discharge plasma technique. The surface topography, chemical composition, and microstructure of the newly developed coating were characterised by a variety of surface analytical techniques. The coating microstructure was found to exhibit a compact striated pattern extending in a direction perpendicular to coating surface, which is composed of equiaxed beta-Ta2O5 grains with an average grain size of similar to 20 nm, well adhered to the Ti-6A1-4V substrate. The hardness and the Young's modulus of the as-deposited coating were obtained by nanoindentation, and the adhesion strength between the coating and substrate was determined by a scratch tester. The dry sliding wear behaviours of the coating were investigated at room temperature against Si3N4 ceramic balls at room temperature under applied loads ranging from 2.3 N to 5.3 N using a ball-on-disc tribometer. The specific wear rates of the coating exhibited only a slight increase with applied normal load, and were shown to be two orders of magnitude lower than that for Ti-6Al-4V under the same loading condition. Furthermore, the electrochemical behaviour of the coating immersed in 3.5 wt.% NaCl solution was systematically examined by using a range of complementary electrochemical techniques including potentiodynamic polarisation, electrochemical impedance spectroscopy (EIS), MottSchottky analysis as well as potential of zero charge (PZC). The results showed that the corrosion resistance of the beta-Ta2O5 nanoceramic coating was better than that of Ti-6Al-4V alloy in 3.5 wt.% NaCl solution. Hence, by possessing higher mechanical properties and good wear and corrosion resistance, the beta-Ta2O5 nanoceramic coating is considered to be a promising candidate for protection of engineering components operating under harsh conditions. (C) 2016 Elsevier B.V. All rights reserved.

Corrosion, Wear and Tribocorrosion Behavior of a New Biomedical Ti-20Zr-10Nb Alloy

Synergistic interactions between wear and corrosion of Ti-16Mo orthopedic alloy

Corrosion and wear behavior of Ti-5Cu-xNb biomedical alloy in simulated body fluid for dental implant applications

Tribological and Corrosion Behaviors of Zr-doped Graphite-Like Carbon Nanostructured Coatings on Ti6Al4V Alloy

Effect of surface oxidation on wear and tribocorrosion behavior of forged and selective laser melting-based TC4 alloys

Electrochemical Corrosion Behavior of Biomedical Ti–22Nb and Ti–22Nb–6Zr Alloys in Saline Medium

Microstructure and Tribocorrosion Properties of NiTi/AlNi2Ti Ternary Intermetallic Alloy

Study on improved tribological properties by alloying copper to CP-Ti and Ti–6Al–4V alloy

Investigation on corrosion behavior of Zr-bearing TA10-based titanium alloys

The synergistic influence of the intravascular starling forces on pulmonary microvascular solute flux in human ARDS.

The effect of Cu content on corrosion, wear and tribocorrosion resistance of Ti-Mo-Cu alloy for load-bearing bone implants

Excellent Corrosion and Wear Resistance of Amorphous and Crystalline ZrCoAl Alloys

Comparative Investigation on the Tribocorrosion Resistance of Ti6Al4V and 60NiTi Alloys in Simulated Seawater Environment

Electrochemical and wear properties of biomedical Ti–Nb–Ag alloy

Electrochemical deposition multi-walled carbon nanotube coatings on the surface of Ti6Al4V alloy for enhancing its biotribological properties

Wear characteristics of Ti–Nb–Ta–Zr and Ti–6Al–4V alloys for biomedical applications

Impact of scandium on mechanical properties, corrosion behavior, friction and wear performance, and cytotoxicity of a β-type Ti–24Nb–38Zr–2Mo alloy for orthopedic applications

Antibacterial activity, corrosion resistance and wear behavior of spark plasma sintered Ta-5Cu alloy for biomedical applications

Influence of Ti3C2Tx Addition on the Corrosion Behaviour and Tribological Properties of Electrodeposited Ni-W-Ti3C2Tx Nanocomposite Coatings

Anisotropy of wear and tribocorrosion properties of L-PBF Ti6Al4V

Corrosion and Wear Behaviours of a Reactive-Sputter-deposited Ta2O5 Nanoceramic Coating