Abstract:This study addresses the compact design requirements for a 11 MeV superconducting cyclotron utilized in isotope production by proposing a design and optimization scheme for a radio frequency (RF) input coupling system. The system, comprising a coupler loop, transmission lines, and RF window, has been tailored to accommodate the spatial constraints imposed by the super conducting magnet radius, thereby facilitating efficient RF power transfer to the RF cavity and minimizing input power. Structural optimization of the coupler loop and RF window has achieved S11 parameter of -82.23 dB, significantly reducing input power while maintaining high coupling efficiency. A coaxial coupler suitable for lower frequency ranges has been designed, employing a tapered structure for the transmission line to ensure a smooth transition to reduce impedance discontinuity effects and enhance adjustability. The multi-stage design of the RF window has achieved fine impedance matching, significantly lowering the S11 parameter. In response to frequency drift caused by RF loss and temperature increase, the study utilizes perturbation theory to analyze the perturbation effect of coupling components on the resonant frequency, designing an adjustable structure with both coarse and precise tuning capabilities, realizing tuning precision at the kHz/mm level and a tuning range of several MHz. A conjectural formula has been proposed based on the impact of the tuner's structural parameters on the resonant frequency, accurately calculating the equivalent inductance of the tuner and the resonant frequency of the RF cavity post-tuner installation, with the maximum estimation error of the resonant frequency kept within 0.1%, offering significant guidance for engineering design.

A Design of Resonant Cavity with an Improved Coupling-Adjusting Mechanism for the W-band EPR Spectrometer

A New Design of Resonant Cavity for the W-band EPR spectrometer

Design of Rectangular Resonators and Planar Microresonators for X-band Pulsed EPR Spectrometer

Subwavelength Dielectric Waveguide for Efficient Travelling-Wave Magnetic Resonance Imaging

On the geometry optimization of X-band resonator for electron paramagnetic resonance application

Hybrid Electromagnetic Boundary for Cavity Resonance Suppression

Cavity Quantum Electrodynamics with Ferromagnetic Magnons in a Small Yttrium-Iron-garnet Sphere

Cryogenic W-band Electron Spin Resonance Probehead with an Integral Cryogenic Low Noise Amplifier

Design and Implementation of Integrated Dual-Mode Pulse and Continuous-Wave Electron Paramagnetic Resonance Spectrometers

Optimization design of the cavity tuning and RF input coupler for an 11 MeV superconducting cyclotron

Broadband Electron Paramagnetic Resonance Spectrometer from 1 to 15 GHz Using Metallic Coplanar Waveguide.

Design, Fabrication and Characterization of a Resonant Magnetic Field Sensor Based on Mechanically Coupled Dual-Microresonator

Lineshape Modulation and Sensing Characteristics of Resonator Assembled With Liquid-Metal Core Edge-Coupled With Microfiber Coupler

Mechanical Analysis of a Β=0.09 162.5mhz Taper HWR Cavity

Surface dielectric resonator for in vivo EPR measurements

High-power Prototype Optical Enhancement Cavity Design for Steady-State Microbunching

Design and Optimization of a BAW Magnetic Sensor Based on Magnetoelectric Coupling

S-band electron spin resonance spectroscopy using a short-circuited coplanar waveguide resonator

Order-of-Magnitude SNR Improvement for High-Field EPR Spectrometers via 3D-Printed Quasioptical Sample Holders

Huge Electric Field Enhancement of Magnetic Resonator Integrated with Multiple Concentric Rings

Internally-tuning whispering-gallery modes in a high-Q conical microresonator for electromagnetically induced transparency-like effect