Abstract:Accurate measurement of CO2 generated from different emission sources is the basis for controlling CO2 emissions and mitigating global warming. With advantages of high accuracy and rapid response, isotope analyzers using spectroscopic techniques, particularly those using cavity ring-down spectroscopy, have been widely used for CO2 emissions monitoring. However, these analyzers often face challenges such as spectral interference from impurity gases and unstable temperature control within the optical cavity in isotope analyzers. To address these challenges, this paper proposes a low-temperature optical cavity scheme utilizing a split Stirling-type pulse tube cryocooler. Combining thermal boundary conditions with particle swarm optimization, a dynamic cooling and temperature control model of the optical cavity was established in MATLAB. The model subsequently analyzed the cooling process, temperature control, and stability of the optical cavity. After 120 h, the simulations showed that the central part of the optical cavity had cooled to 126.4 K with a heat leakage of 8.90 W, in agreement with the experimental results that stabilized at 126.8 K. The temperature fluctuations remained within 0.1 K/h while controlling an overall temperature of 170 K with a temperature difference of +/- 5 K. Changes in the electrical input power of cryocooler had no influence on the temperature distribution. This advancement not only lowers the operating temperature of the optical cavity to minimize spectral interference but also enhances the precision and efficiency of temperature control.

Temperature control of atomic gas chamber using a non magnetic heating chip fabricated on quartz substrate

Numerical Simulation and Experimental Verification of Dynamic Cooling and Temperature Control of the Optical Cavity in a Co2 Isotope Analyzer

Precise temperature control of microfluidic chamber for gas and liquid phase reactions

Thermal Management of Microfabricated Vapor Cells for Chip Scale Atomic Clocks

Thermal and Magnetic Field Analysis of Temperature Control Module for VCSEL Chips

Microheater Chips with Carbon Nanotube Resistors

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

Quantifying Real-Time Sample Temperature Under the Gas Environment in the Transmission Electron Microscope Using a Novel MEMS Heater

High-Precision Temperature Control of Laser Crystals

Micro quartz crystal tuning fork based photothermal spectroscopy for trace gas detection

High-sensitivity Temperature Sensing by Employing an On-Chip High-Q PDMS-coated Toroidal Microcavity

Diamond nitrogen-vacancy color-centered thermometer for integrated circuit application.

A new Mach–Zehnder interference temperature measuring sensor based on silica-based chip

Study on a High-Precision Piezoelectric Resonators Quartz Crystal Temperature Sensor by Means of Three-Dimensional Finite Element Method

Design of Digital Temperature Control System for Chip-scale Atomic Clock

Integrated Electronic Transport and Thermometry at milliKelvin Temperatures and in Strong Magnetic Fields

Photonic thermometer by silicon nitride microring resonator with milli-kelvin self-heating effect

Femtosecond Laser Direct-Writing On-Chip MZI Temperature Sensor Based on Polymer Waveguides

Finite Element Method Design and Fabrication of Thermo-sensitive Quartz Tuning Fork Resonators as Temperature Sensor

An Antiinterference Temperature Sensor Based on Mach-Zehnder Interferometer Using Kagome Hollow-Core Photonic Crystal Fiber

On-chip Thermometry for Microwave Optomechanics Implemented in a Nuclear Demagnetization Cryostat