Abstract:The nitrogen-vacancy (NV) centre in diamond is regarded as a promising micro-nano scale thermometer due to its high stability, good temperature resolution and its scope for integration. The relation between the zero-field splitting parameter (D) and temperature (T) is fundamental for its applications. In this work, an optical system that uses continuous-wave optically detected magnetic resonance technique for the measurement of D-T was built. The temperature measured by a home-made thermostatic system and two calibrated platinum resistance thermometers was regarded as reference. Before D was measured, microwave and laser heating effect was investigated quantitatively. The drift of D at different microwave and laser power in this system was observed. Although the dips' contrast could be improved by higher microwave power, the heating effect was significant if the power was higher than-5 dBm. The heating effect from laser power showed a linear trend which could be corrected by an average factor of -3.69 x 10(-5) GHz mW(-1). By using the optimized parameters, D was measured from 298 to 383 K. The reliability of our experimental method can be demonstrated by the good agreement between the present data and those obtained from similar samples. Our work provides a reference for similar experiments that the heating effect could not be neglected, which would be essential to obtain a more precise D-T relation when considering the NV centre as a thermometer. The inconsistency existing in the results from different groups indicates that further metrological investigations are still needed for the application of the NV centre as a practical and accurate thermometer in the near future.

Diamond nitrogen-vacancy color-centered thermometer for integrated circuit application.

High Spatial Resolution Thermometer Microprobe Based on the Nitrogen-Vacancy Centers Ensemble in the Diamond Particle With Tapered Fiber

Thermal-demagnetization-enhanced hybrid fiber-based thermometer coupled with nitrogen-vacancy centers

Hybrid diamond quantum sensor with submicrokelvin resolution under ambient conditions

Cross-correlated quantum thermometry using diamond containing dual-defect centers

High-sensitivity temperature sensing using an implanted single nitrogen-vacancy center array in diamond

Ultra-sensitive hybrid diamond nanothermometer

Nanometer scale quantum thermometry in a living cell

Temperature dependence of nitrogen-vacancy center ensembles in diamond based on an optical fiber

Temperature Sensing with RF-Dressed States of Nitrogen-Vacancy Centers in Diamond

Temperature-robust Diamond Magnetometry Based on the Double-Transition Method

Real-time Simultaneous Dual Sensing of Temperature and Magnetic Field using NV-based Nano-diamonds

High sensitivity silicon carbide divacancy-based thermometer

Optimal architecture for diamond-based wide-field thermal imaging

High-sensitivity silicon carbide divacancy-based temperature sensing

Broadband Magnetometry and Temperature Sensing with a Light Trapping Diamond Waveguide

Selective temperature sensing in nanodiamonds using dressed states

Temperature Dependent Energy Level Shifts of Nitrogen-Vacancy Centers in Diamond

Lock-in Thermography Using Diamond Quantum Sensors

Temperature dependence of the zero-field splitting parameter of nitrogen-vacancy centre ensembles in diamond considering microwave and laser heating effect

Magnetic-field-assisted optical fiber quantum temperature sensor with enhanced sensitivity