Abstract:This study used the horizontal tubular heating furnace to explore the melting potential of circulating fluidized bed (CFB) incinerator fly ash and mechanical grate furnace (MGF) incinerator fly ash. The horizontal cyclone melting furnace was then built to explore further the feasibility of scale melting of MSWI fly ash. The melting characteristic temperature, amorphous content, and heavy metal leaching concentration characterized the melting potential and solidification effect of MSWI fly ash. The experimental results show that the amorphous content of CFB fly ash after melting is up to 92.37%, and the volatilization rate of heavy metals Zn, Pb, and Ni does not exceed 30%. MGF fly ash exhibits the "sintering into shells" phenomenon during heating, and the leaching concentrations of heavy metals Pb in the sintered products still exceed the standard limits. In addition, the volatilization rates of heavy metals Cu, Zn, Cd, Pb, Cr, and Ni in Slag II are above 50%, and the volatilization rate of Cr reaches 85%. So, slag's amorphous content also affects heavy metals' volatilization rate. The MSWI fly ash melting characteristic temperature decreases with the decrease of alkalinity value. When the alkalinity value drops to 0.6, the melting characteristic temperature reaches its lowest value. Mixing 80% CFB fly ash or 50% MGF bottom ash into MGF fly ash can significantly enhance the melting potential to reduce hazardous waste. When using the horizontal cyclone melting furnace to process MSWI fly ash on a large scale, MSWI fly ash achieves an excellent melting effect with an amorphous content of over 93% at the positions of the furnace middle section, inner tail cone, slag discharge outlet, and flue gas outlet. The fly ash particles are in motion in the melting furnace, so the particle size distribution affects the melting effect of MSWI fly ash.

Numerical modeling of gas-solid two-phase flow in a plasma melting furnace

Numerical Simulation of the Interaction Between Arc Plasma and Molten Slag in Electric Arc Furnace for High-Titania Slag Smelting

Pilot Scale Study on Plasma Melting the Hazardous Waste Incineration Ash and Slag

Effect of Feed Forms on the Results of Melting of Fly Ash by a DC Plasma Arc Furnace

Process exploration for scale melting and solidifying of municipal solid waste incineration (MSWI) fly ash by horizontal cyclone melting furnace

Vitrification of MSWI Fly Ash by Thermal Plasma Melting and Fate of Heavy Metals

Thermal synergistic treatment of municipal solid waste incineration (MSWI) fly ash and fluxing agent in specific situation: Melting characteristics, leaching characteristics of heavy metals

Computational Fluid Dynamics Simulation of Gas–Matte–Slag Three-Phase Flow in an ISASMELT Furnace

Destruction of inorganic municipal solid waste incinerator fly ash in a DC arc plasma furnace

Study on the Melting Characteristics of Slag from the Incinerator of Hazardous Wastes Containing Fluorine and Chlorine

Modeling Framework for the Simulation of an Electric Smelting Furnace Considering Freeze Lining Formation

Application of a new plasma torch for municipal wastes incinerators fly ashes treatment

Numerical simulation on the deposition characteristics of MSWI fly ash particles in a cyclone furnace

Numerical Simulation of Multi-Physics Fields in Fused Magnesia Furnace

Heavy metal migration regimes in the production of syngas from solid waste by thermal plasma treatment

Modeling of Thermochemical Behavior in an Industrial-Scale Rotary Hearth Furnace for Metallurgical Dust Recycling

Mathematical modeling of mass, heat and fluid flow in a reverberatory furnace for melting nickel-containing raw materials

Analysis of the melting process of carbon-bearing pellets in iron bath, slag bath and graphite crucible

Numerical Simulation of Combustion and Characteristics of Fly Ash and Slag in a “V-type” Waste Incinerator

Modeling Freeze‐Lining Formation: A Case Study in the Slag Fuming Process

From simulation to reality: CFD-ML-driven structural optimization and experimental analysis of thermal plasma reactors