Abstract:The characteristics of a novel atmospheric plasma source generated by a dc double-anode plasma torch have been investigated by measuring its emission spectra and heat flux. The original plasma torch design has been proven to be effective in enhancing the aerodynamic stability and luminous intensity of the plasma arc, as well as the jet length. As an application, a vitrification process based on the double-arc argon plasma has been employed to convert toxic incinerator fly ash into a harmless, stable, and chemical durable product. The vitrified slag exhibits a homogeneous, highly dense, and amorphous glassy structure, which is further confirmed by scanning electron microscopy and X-ray diffraction. The leaching concentrations of the target heavy metals in the slag are decreased significantly and are much lower than the current regulatory thresholds of China and U.S., which reveals that the contaminants have been sufficiently immobilized in the silicate network matrix. It is also determined that the vitrification contributes to the predominant reduction of the specific surface area of the fly ash and to the improvement of the slag hardness. Furthermore, the total concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are also appreciably reduced through the plasma vitrification process with a high decomposition rate of 99.97% in PCDD/Fs and 99.94% in I-TEQ. These results indicate that the vitrified product with good quality has great potential to be used as a viable alternative for construction or geotechnical applications. The vitrification process based on the double-arc plasma technology has been demonstrated to be effective and reliable for the stabilization, detoxification, and recycling of waste incinerator fly ash.

Application of a new plasma torch for municipal wastes incinerators fly ashes treatment

Thermal Treatment of Municipal Solid Waste Incinerator Fly Ash Using DC Double Arc Argon Plasma

Application of Thermal Plasma to Vitrify Fly Ash from Municipal Solid Waste Incinerators

Diagnostic Of Novel Atmospheric Plasma Source And Its Application To Vitrification Of Waste Incinerator Fly Ash

Destruction of inorganic municipal solid waste incinerator fly ash in a DC arc plasma furnace

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

Plasma vitrification and heavy metals solidification of MSW and sewage sludge incineration fly ash

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Vitrification Of Mswi Fly Ash Using Thermal Plasma Technology

DC Arc Plasma Furnace Melting of Waste Incinerator Fly Ash

[Study on Vitrification of Fly Ashes from Municipal Wastes Incinerator with a Plasma Torch].

The Degradation of PCDD/Fs in Fly Ash Using Dielectric Barrier Discharge in a Lab-Scale Reactor

Plasma Vitrification of Air Pollution Control Residues from Municipal Solid-Waste Incineration

Vitrification of MSWI fly ash using direct current double arc plasma

Pilot Scale Study on Plasma Melting the Hazardous Waste Incineration Ash and Slag

Study of double-chamber air arc plasma torch and the application in solid-waste disposal

Detoxifying PCDD/Fs and heavy metals in fly ash from medical waste incinerators with a DC double are plasma torch

Vitrification of MSWI Fly Ash by Thermal Plasma Melting and Fate of Heavy Metals

Thermal Plasma Vitrification of MSWI Fly Ash Mixed with Different Biomass Ashes

Experimental Study on Vitrification of Fly Ashes from Municipal Solid Waste Incinerator

Microwave plasma torches for solid waste treatment and vitrification