Abstract:Safety and efficient dispose of municipal solid waste incineration (MSWI) fly ash with high toxicity has emerged as a worldwide challenge. Vitrification provides the advantages of capacity reduction, detoxification, and solidification of heavy metals, which has the potential to dispose of hazardous waste on a large scale. Herein, co-vitrification of MSWI fly ash and bottom slag has been accomplished based on the characteristics of calcium and silicon composition. A novel approach for producing glass ceramic foams by alkaline activation-crystallization was developed to realize the disposal of the obtained glass. The effect of MSWI fly ash/bottom slag ratios on the glass network, crystallization ability of the basic glass, pore structure, and physical properties of the porous green body was investigated. The results revealed that with increasing MSWI fly ash proportion, the Si-O of [SiO4] in the basic glass changed significantly and the crystallization ability steadily reduced. Si-O and Al-O in basic glass are easy to corrode under alkaline conditions, releasing Ca2+ and forming a low solubility product, calcium silicate hydrate. When the crystallization temperature increases from 950 ℃ to 1150 ℃, it is more conducive to the precipitation of the gehlenite phase. Extending the crystallization time promotes three-dimensional growth of crystals that are coupled with each other to form a network structure and a multi-stage pore structure. The pore structure was developed with the help of NH3 and H2 generated by the secondary aluminum ash (SAA). Through the preparation of glass ceramic foams, the raw materials were detoxified. The toxic heavy metals showed extremely low leaching concentrations, which were smaller than the limit of TCLP. The prepared samples had 70.22-80.61% of porosity, 0.78-1.19 g/cm3 of low bulk density, and 0.54-7.86 MPa of compressive strength.

Vitrification Of Mswi Fly Ash Using Thermal Plasma Technology

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

Experimental Study on Vitrification of Fly Ashes from Municipal Solid Waste Incinerator

Plasma vitrification and heavy metals solidification of MSW and sewage sludge incineration fly ash

Vitrification of MSWI Fly Ash by Thermal Plasma Melting and Fate of Heavy Metals

Application of Thermal Plasma to Vitrify Fly Ash from Municipal Solid Waste Incinerators

Diagnostic Of Novel Atmospheric Plasma Source And Its Application To Vitrification Of Waste Incinerator Fly Ash

Destruction of inorganic municipal solid waste incinerator fly ash in a DC arc plasma furnace

Addressing environmental sustainability of plasma vitrification technology for stabilization of municipal solid waste incineration fly ash

Thermal Treatment of Municipal Solid Waste Incinerator Fly Ash Using DC Double Arc Argon Plasma

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Comprehensive performance evaluation of plasma vitrification for detoxification and valorization of residual wastes

Vitrification of MSWI fly ash using direct current double arc plasma

Thermal Plasma Vitrification of MSWI Fly Ash Mixed with Different Biomass Ashes

Stabilization of MSWI Fly Ash by Glass-ceramics Recycling Process

[Study on Vitrification of Fly Ashes from Municipal Wastes Incinerator with a Plasma Torch].

Smelting disposal of municipal solid waste incineration fly ash

Co-vitrification of municipal solid waste incinerator fly ash and bottom slag: Glass detoxifying characteristics and porous reformation

Melting Characteristics During the Vitrification of MSW Incinerator Fly Ash by Swirling Melting Treatment

Application of a new plasma torch for municipal wastes incinerators fly ashes treatment

Characteristics of MSWI fly ash during vitrification