Abstract:Nuclear reactors are vital to the global economy due to the large amounts of baseload power they can provide with minimal intermittence. However, these reactors are extremely complicated to design and build. Therefore, any improvement in the design process and timeline of nuclear reactor development would have a significant impact on the reactor design community and the world. In recent years, machine learning (ML) algorithms have gained popularity in handling difficult problems that previously required too much data or computational power to effectively solve. These include natural language processing, computer vision, and advanced process optimization. ML algorithms present a potentially powerful tool in the realm of reactor design and have already been implemented in some specific reactor design and operational optimization applications by researchers around the world. While these previous uses of ML algorithms are effective, they are very specific and a more generalized, and easily applied framework could potentially be used to accelerate the design of Gen IV reactors, reducing the workload of reactor designers and researchers. The development of such a versatile framework for reactor optimization using ML, CFD, and neutronic codes, and the validation of such, was the purpose of this work. The baseline reactor to be optimized was the BYU Molten Salt Micro-Reactor ( Larsen et al., 2023 ). To establish this ML optimization, 35 training runs were completed using STARCCM + CFD software, and OpenMC neutronic modeling to generate data. The 3-dimensional cartesian data were extracted for each run, providing up to several million data points per training run. Moderator thickness, salt thickness, and moderator housing (plate) thickness were variables in the geometric optimization, and regressor type, data quantity per run, and training run quantity were variables in the model optimization. The model was first optimized by weighing model variables against train and test accuracy. This optimal model was then given 4096 geometric reactor iterations, and a temperature profile was predicted for each. The lowest-temperature option was chosen as lower temperature results in longer structural material life and less required secondary cooling expense, as well as more favorable neutronics. This result was then validated in CFD. The optimal reactor design surpassed all training runs by at least 220 K in maximum temperature, 85 K in average temperature, and 49 K in standard deviation of temperature. These represent significant improvement over all training designs and the baseline design.

From simulation to reality: CFD-ML-driven structural optimization and experimental analysis of thermal plasma reactors

Application of Machine Learning to Predict the Performance of an EMIPG Reactor Using Data from Numerical Simulations

Development and Cfd Simulation of A Novel Phosphoric Reactor with Waste Heat Recovery

Numerical Simulation of the Entrained Flow Hydropyrolysis of Coal in Magnetically Rotating Plasma Reactor

Thermal Plasma Medical Waste Treatment: Data-ML Driven System Performance and Product Prediction

Modeling and Performance Analysis of Municipal Solid Waste Treatment in Plasma Torch Reactor

Machine learning-driven optimization of plasma-catalytic dry reforming of methane

Process Design and Simulation Analysis of Plasma Furnace Disposal of Solid Waste

Flow simulation and optimization of plasma reactors for coal gasification

Gas–solid reactor optimization based on EMMS-DPM simulation and machine learning

Predictive Control of Reactor Network Model Using Machine Learning for Hydrogen-Rich Gas and Biochar Poly-Generation by Biomass Waste Gasification in Supercritical Water

Analysis of the Impact of Plasma Jet Mode on Medical Waste Gasification Furnace

Optimization of passive modular molten salt microreactor geometric perturbations using machine learning

CFD Simulation Analysis of Sub-Component in Municipal Solid Waste Gasification Using Plasma Downdraft Technique

Optimization of thermophysical processes of bottom part of shaft furnace for plasma treatment plant of solid radioactive waste

Study on Thermal Plasma Combined Treatment for Medical Waste

Numerical Study of Methane to Acetylene Process in Novel Thermal Plasma Array Reactor

Up-rotating Plasma Gasifier for Waste Treatment to Produce Syngas and Intensified by Carbon Dioxide

Investigation on Heat Transfer and Fluid Flow of a Plasma Arc in a Plasma Melting Furnace: Model Validation and Parameter Effects

Numerical modeling of gas-solid two-phase flow in a plasma melting furnace

Optimization Simulation of Thermal Plasma Reactor for Coal Gasification