Abstract:An in-depth study of the chemical kinetic mechanism of biodiesels can facilitate accurate prediction of engine combustion and emission characteristics. Surrogate fuel is a feasible method for simulating the combustion chemistry of real biodiesel. Methyl myristate (MMY), one of the main components and a widely used surrogate for biodiesel, was investigated for the autoignition characteristics using a newly heated rapid compression machine (RCM). In this work, the ignition delay times (IDTs) of MMY were measured at compressed pressures of 10/15/20/30 bar with compressed temperatures ranging from 700 K to 900 K, and equivalence ratios varying from 0.3 to 1.25. The experimental observation successfully captured a typical negative temperature coefficient (NTC) phenomenon of IDT. The present experiment is the first one to measure the IDTs of MMY in a RCM, while also marking the first instance of observing the NTC phenomenon in macromolecular fatty acid methyl esters above C10. Besides, a skeletal model for methyl myristate has been developed based on the idea of decoupling methodology. In terms of fuel-dependent reactions, the kinetic model is divided into two parts: high-temperature reactions and low-temperature chain branching reactions. Combined with the experimental and simulation results, the dependence of the IDT of methyl myristate on compressed temperature, compressed pressure, equivalence ratio, and oxygen mole fraction at low-to-intermediate temperature was systematically investigated. The simulation results show that the developed skeletal model captures the ignition delay times well at low-to-intermediate temperatures and accurately predicts both the NTC phenomenon and the corresponding temperature range. Based on this, the key reactions in the combustion of MMY under different conditions were elucidated through sensitivity analysis. Ultimately, the model validation was conducted against the high-temperature IDT data from the literature. Novelty and significance statement The chemical kinetic models of various biodiesels are essential for simulating the working process of internal combustion engines and accurately predicting the combustion and emission characteristics. Among these, the autoignition characteristic is one of the most important parameters for model validation. Besides, the carbon chain length of methyl myristate closely resembles that of real biodiesels, making it an ideal surrogate fuel for biodiesels. In this study, the IDTs of MMY were measured for the first time at low-to-intermediate temperatures in a heated RCM, thereby experimentally confirming the NTC phenomenon of methyl myristate. Additionally, a skeletal model of MMY was developed based on the idea of decoupling methodology, which can accurately predict the autoignition characteristics of MMY at low-to-intermediate temperatures. The simulated values demonstrate good agreement with experimental data. Overall, the present study provides an IDT database for the development and validation of the methyl myristate mechanism.

Experimental and Modeling Study of the Low to High-Temperature Oxidation of the Methyl Isopropyl Ketone in O2/N2/Ar and O2/CO2/Ar Atmospheres

High-temperature Oxidation of Methyl Isopropyl Ketone: A Shock Tube Experiment and a Kinetic Model

An Experimental and Modeling Study on the Ozone-Assisted Low-Temperature Ignition of Methylcyclohexane in an RCM

Isomer-specific Influences on Ignition and Intermediates of Two C5 Ketones in an RCM

Experimental and modeling study of ignition delay times of n-C5H12 and C3H6 under O2/CO2 atmospheres

A shock tube experiment and an improved high-temperature diisopropyl ketone model by Bayesian optimization

Low to Intermediate Temperature Oxidation Studies of Dimethoxymethane/n-Heptane Blends in a Jet-Stirred Reactor

A Comprehensive Experimental and Kinetic Modeling Study of Dimethoxymethane Combustion

Experimental and Kinetic Study on the Pyrolysis and Oxidation of Isopentane in a Jet-Stirred Reactor

Experimental and kinetic model studies on the low- to moderate-temperature oxidation of N-methyl pyrrole in a jet-stirred reactor

Spray autoignition study of bio-oxygenated additives blended with aviation kerosene under engine-like cold-start conditions

An Experimental and Kinetic Modeling Study on Dimethyl Carbonate (dmc) Pyrolysis and Combustion

Methylcyclohexane Pyrolysis and Oxidation in a Jet-Stirred Reactor

Low-to-intermediate temperature autoignition of methyl myristate: Ignition delay time measurement and skeletal model development

Experimental and Modeling Study of the Effects of Adding Oxygenated Fuels to Premixed N-Heptane Flames

Experimental and numerical study on the ignition delay times of dimethyl ether/propane mixtures in O2/CO2 atmospheres

An Experimental and Kinetic Modeling Study on the Low-Temperature Oxidation, Ignition Delay Time, and Laminar Flame Speed of a Surrogate Fuel for RP-3 Kerosene

Autoignition of methyl palmitate in low to intermediate temperature: Experiments in rapid compression machine and kinetic modeling

Experimental and modeling study of the ignition kinetics of dimethyl carbonate

Understanding the Antagonistic Effect of Methanol As a Component in Surrogate Fuel Models: A Case Study of Methanol/n-Heptane Mixtures

Experimental and Modeling Studies on Ignition Delay Times of Methyl Hexanoate/n-Butanol Blend Fuels at Elevated Pressures