Abstract:An in-depth study of the chemical kinetic mechanism of biodiesels can facilitate accurate prediction of engine combustion and emission characteristics. Surrogate fuel is a feasible method for simulating the combustion chemistry of real biodiesel. Methyl myristate (MMY), one of the main components and a widely used surrogate for biodiesel, was investigated for the autoignition characteristics using a newly heated rapid compression machine (RCM). In this work, the ignition delay times (IDTs) of MMY were measured at compressed pressures of 10/15/20/30 bar with compressed temperatures ranging from 700 K to 900 K, and equivalence ratios varying from 0.3 to 1.25. The experimental observation successfully captured a typical negative temperature coefficient (NTC) phenomenon of IDT. The present experiment is the first one to measure the IDTs of MMY in a RCM, while also marking the first instance of observing the NTC phenomenon in macromolecular fatty acid methyl esters above C10. Besides, a skeletal model for methyl myristate has been developed based on the idea of decoupling methodology. In terms of fuel-dependent reactions, the kinetic model is divided into two parts: high-temperature reactions and low-temperature chain branching reactions. Combined with the experimental and simulation results, the dependence of the IDT of methyl myristate on compressed temperature, compressed pressure, equivalence ratio, and oxygen mole fraction at low-to-intermediate temperature was systematically investigated. The simulation results show that the developed skeletal model captures the ignition delay times well at low-to-intermediate temperatures and accurately predicts both the NTC phenomenon and the corresponding temperature range. Based on this, the key reactions in the combustion of MMY under different conditions were elucidated through sensitivity analysis. Ultimately, the model validation was conducted against the high-temperature IDT data from the literature. Novelty and significance statement The chemical kinetic models of various biodiesels are essential for simulating the working process of internal combustion engines and accurately predicting the combustion and emission characteristics. Among these, the autoignition characteristic is one of the most important parameters for model validation. Besides, the carbon chain length of methyl myristate closely resembles that of real biodiesels, making it an ideal surrogate fuel for biodiesels. In this study, the IDTs of MMY were measured for the first time at low-to-intermediate temperatures in a heated RCM, thereby experimentally confirming the NTC phenomenon of methyl myristate. Additionally, a skeletal model of MMY was developed based on the idea of decoupling methodology, which can accurately predict the autoignition characteristics of MMY at low-to-intermediate temperatures. The simulated values demonstrate good agreement with experimental data. Overall, the present study provides an IDT database for the development and validation of the methyl myristate mechanism.

Low-to-intermediate temperature autoignition of methyl myristate: Ignition delay time measurement and skeletal model development

Experimental and Modeling Study on Autoignition of a Biodiesel/n-Heptane Mixture and Related Surrogate in a Heated Rapid Compression Machine

Skeletal Mechanism Construction for Heavy Saturated Methyl Esters in Real Biodiesel Fuels

Experimental and Modeling Study on the Autoignition Characteristics of Methyl Stearate in a Rapid Compression Machine

The effect of the unsaturation degree on the gas-phase autoignition of methyl oleate and methyl linoleate: Experimental and modeling study

Autoignition Study of Methyl Decanoate Using a Rapid Compression Machine

Autoignition Behavior of Methanol/diesel Mixtures: Experiments and Kinetic Modeling

Autoignition of methyl palmitate in low to intermediate temperature: Experiments in rapid compression machine and kinetic modeling

SKELETAL MECHANISM CONSTRUCTION FOR METHYL OLEATE IN REAL BIODIESEL FUELS

Experimental and modeling validation of a large diesel surrogate: Autoignition in heated rapid compression machine and oxidation in flow reactor

Autoignition of Methyl Valerate at Low to Intermediate Temperatures and Elevated Pressures in a Rapid Compression Machine

Experimental and Modeling Study of the Autoignition for Diesel and N-Alcohol Blends from Ethanol to N-Pentanol in Shock Tube and Rapid Compression Machine

Chemical Kinetic Model Development of Biodiesel Surrogate Fuel and Reaction Path Analysis

Auto-ignition Characteristics of a Near-Term Light Surrogate Fuel for Marine Diesel: an Experimental and Modeling Study

A Skeletal Mechanism of A Biodiesel Surrogate Fuel for Compression Ignition Engines

Predictions of Oxidation and Autoignition of Large Methyl Ester with Small Molecule Fuels

Ignition Delay Time Measurements and Kinetic Modeling of Methane/diesel Mixtures at Elevated Pressures

Experimental and Modeling Study of the Autoignition Characteristics of Commercial Diesel under Engine-Relevant Conditions

Experimental and kinetic modeling study of extinction and ignition of methyl decanoate in laminar non-premixed flows

Shock tube experiments and kinetic modeling of ignition of unsaturated C 5 methyl esters

A HyChem Combustion Model of Methyl Decanoate