Abstract:An in-depth study of the chemical kinetic mechanism of biodiesels can facilitate accurate prediction of engine combustion and emission characteristics. Surrogate fuel is a feasible method for simulating the combustion chemistry of real biodiesel. Methyl myristate (MMY), one of the main components and a widely used surrogate for biodiesel, was investigated for the autoignition characteristics using a newly heated rapid compression machine (RCM). In this work, the ignition delay times (IDTs) of MMY were measured at compressed pressures of 10/15/20/30 bar with compressed temperatures ranging from 700 K to 900 K, and equivalence ratios varying from 0.3 to 1.25. The experimental observation successfully captured a typical negative temperature coefficient (NTC) phenomenon of IDT. The present experiment is the first one to measure the IDTs of MMY in a RCM, while also marking the first instance of observing the NTC phenomenon in macromolecular fatty acid methyl esters above C10. Besides, a skeletal model for methyl myristate has been developed based on the idea of decoupling methodology. In terms of fuel-dependent reactions, the kinetic model is divided into two parts: high-temperature reactions and low-temperature chain branching reactions. Combined with the experimental and simulation results, the dependence of the IDT of methyl myristate on compressed temperature, compressed pressure, equivalence ratio, and oxygen mole fraction at low-to-intermediate temperature was systematically investigated. The simulation results show that the developed skeletal model captures the ignition delay times well at low-to-intermediate temperatures and accurately predicts both the NTC phenomenon and the corresponding temperature range. Based on this, the key reactions in the combustion of MMY under different conditions were elucidated through sensitivity analysis. Ultimately, the model validation was conducted against the high-temperature IDT data from the literature. Novelty and significance statement The chemical kinetic models of various biodiesels are essential for simulating the working process of internal combustion engines and accurately predicting the combustion and emission characteristics. Among these, the autoignition characteristic is one of the most important parameters for model validation. Besides, the carbon chain length of methyl myristate closely resembles that of real biodiesels, making it an ideal surrogate fuel for biodiesels. In this study, the IDTs of MMY were measured for the first time at low-to-intermediate temperatures in a heated RCM, thereby experimentally confirming the NTC phenomenon of methyl myristate. Additionally, a skeletal model of MMY was developed based on the idea of decoupling methodology, which can accurately predict the autoignition characteristics of MMY at low-to-intermediate temperatures. The simulated values demonstrate good agreement with experimental data. Overall, the present study provides an IDT database for the development and validation of the methyl myristate mechanism.

Shock tube experiments and kinetic modeling of ignition of unsaturated C 5 methyl esters

Experimental Autoignition of C4-C6 Saturated and Unsaturated Methyl and Ethyl Esters

Shock Tube and Kinetic Modeling Study of Cyclopentane and Methylcyclopentane

Shock Tube Measurements and Kinetic Study of Methyl Acetate Ignition

Experimental and Modeling Efforts Towards a Better Understanding of the High-Temperature Combustion Kinetics of C3C5 Ethyl Esters

Ab initio kinetic study on the abstraction reactions of methylcyclohexane and implications for high‐temperature ignition simulations from shock tube experiment

Experimental and Modeling Study on the Autoignition Characteristics of Methyl Stearate in a Rapid Compression Machine

Skeletal Mechanism Construction for Heavy Saturated Methyl Esters in Real Biodiesel Fuels

Low-to-intermediate temperature autoignition of methyl myristate: Ignition delay time measurement and skeletal model development

Photoionization Mass Spectrometry and Modeling Study of Premixed Flames of Three Unsaturated C5H8O2 Esters

Shock Tube Investigation of Methyl Tert Butyl Ether and Methyl Tetrahydrofuran High‐temperature Kinetics

Predictions of Oxidation and Autoignition of Large Methyl Ester with Small Molecule Fuels

Experimental and Kinetic Modeling Study on 2,4,4-Trimethyl-1-pentene Ignition Behind Reflected Shock Waves

Shock Tube Study of Methyl Pentanoate Ignition at High Temperatures

Experimental and Modeling Study of the Autoignition for Diesel and N-Alcohol Blends from Ethanol to N-Pentanol in Shock Tube and Rapid Compression Machine

Fuel-Specific Influences on the Composition of Reaction Intermediates in Premixed Flames of Three C5h10o2 Ester Isomers

Measurements and Kinetic Study on the Ignition Delay Time of Dimethyl Carbonate/n-Heptane/oxygen/argon Mixtures

The Autoignition of Heptamethylnonane at Moderate-to-high Temperatures and Elevated Pressures: Shock Tube Study and Improved Chemical Kinetic Model

Experiments and Modeling of the Autoignition of Methylcyclohexane at High Pressure

The effect of the unsaturation degree on the gas-phase autoignition of methyl oleate and methyl linoleate: Experimental and modeling study

Autoignition of Methyl Valerate at Low to Intermediate Temperatures and Elevated Pressures in a Rapid Compression Machine