Abstract:Autoignition characteristics of methyl palmitate (C 17 H 34 O 2 ), a waxy solid at room temperature, were investigated in a newly developed heated rapid compression machine. Ignition delay times (IDT) of methyl palmitate were firstly measured at the low-to-intermediate temperatures of 780–980 K and equivalence ratios of 0.3–1.0 under three pressures of 10, 15, and 20 bar. A negative effect of the increase in compressed pressure, equivalence ratio, and oxygen mole fraction on IDTs at different compressed temperatures was qualitatively and quantitatively revealed. Besides, the dependence of IDTs on compressed pressure and equivalence ratio decreases with increasing temperature. A recently optimized mechanism was used to predict the experimental results. The simulations show an obvious negative temperature coefficient (NTC) behavior at the compressed temperatures of 780–830 K which was not observed in the experiment. Meanwhile, the mechanism pronouncedly underestimated the reactivity of methyl palmitate at higher temperatures in this study. Sensitivity analyses at different temperatures and pressures for equivalence ratios of 0.5 were conducted to determine the crucial reactions that caused the difference between the simulation and experiments. On this basis, further optimization was carried out and the simulation results of the latest mechanism show a good agreement with the experimental data. It is verified against shock tube experimental data that the optimization adjustment in this paper has a small positive impact on the prediction ability of the originally documented mechanism under temperatures above 1000 K. In the end, validation for the optimized mechanism against experimental data in a jet-stirred reactor (JSR) was performed. Overall, the experimental results fill in gaps in IDT data on methyl palmitate at low-to-intermediate temperatures and provide a reference IDT database for the development and validation of methyl palmitate mechanisms.

Experimental Autoignition of C4-C6 Saturated and Unsaturated Methyl and Ethyl Esters

Shock tube experiments and kinetic modeling of ignition of unsaturated C 5 methyl esters

Autoignition of Methyl Valerate at Low to Intermediate Temperatures and Elevated Pressures in a Rapid Compression Machine

Experiments and Modeling of the Autoignition of Methyl-Cyclohexane at High Pressure

Experiments and Modeling of the Autoignition of Methylcyclohexane at High Pressure

Experimental and modeling study of the autoignition of cyclopentane

Shock Tube Study on Auto-Ignition Characteristics of Kerosene/air Mixtures

Experimental and Modeling Efforts Towards a Better Understanding of the High-Temperature Combustion Kinetics of C3C5 Ethyl Esters

High Temperature Ignition Delay Times of C5 Primary Alcohols

Ignition Delay Times of Ethane under O2/CO2 Atmosphere at Different Pressures by Shock Tube and Simulation Methods

An Experimental Investigation of Ethylene/o2/diluent Mixtures: Laminar Flame Speeds with Preheat and Ignition Delays at High Pressures

Autoignition enhancement of methane by admixture of low fraction of acetaldehyde: Simulations and RCM experiments in stoichiometric and rich mixtures

Shock Tube Study of Methylcyclohexane Ignition over a Wide Range of Pressure and Temperature

Intermediate species measurement during iso -butanol auto-ignition

Ethylene Oxidation Experimental Study and Kinetic Mechanism Analysis Based on Shock Tube

An Autoignition Study of iso-Butanol: Experiments and Modeling

Ignition Delay Time Measurements of Normal Alkanes and Simple Oxygenates

The autoignition of cyclopentane and cyclohexane in a shock tube

Numerical Analysis of the Autoignition of Methanol, Ethanol, N-Heptane and N-Octane Sprays with Detailed Chemistry

Autoignition of methyl palmitate in low to intermediate temperature: Experiments in rapid compression machine and kinetic modeling

Investigations on Laminar Premixed Flame Characteristics of Ethyl Acetate