Abstract:An in-depth study of the chemical kinetic mechanism of biodiesels can facilitate accurate prediction of engine combustion and emission characteristics. Surrogate fuel is a feasible method for simulating the combustion chemistry of real biodiesel. Methyl myristate (MMY), one of the main components and a widely used surrogate for biodiesel, was investigated for the autoignition characteristics using a newly heated rapid compression machine (RCM). In this work, the ignition delay times (IDTs) of MMY were measured at compressed pressures of 10/15/20/30 bar with compressed temperatures ranging from 700 K to 900 K, and equivalence ratios varying from 0.3 to 1.25. The experimental observation successfully captured a typical negative temperature coefficient (NTC) phenomenon of IDT. The present experiment is the first one to measure the IDTs of MMY in a RCM, while also marking the first instance of observing the NTC phenomenon in macromolecular fatty acid methyl esters above C10. Besides, a skeletal model for methyl myristate has been developed based on the idea of decoupling methodology. In terms of fuel-dependent reactions, the kinetic model is divided into two parts: high-temperature reactions and low-temperature chain branching reactions. Combined with the experimental and simulation results, the dependence of the IDT of methyl myristate on compressed temperature, compressed pressure, equivalence ratio, and oxygen mole fraction at low-to-intermediate temperature was systematically investigated. The simulation results show that the developed skeletal model captures the ignition delay times well at low-to-intermediate temperatures and accurately predicts both the NTC phenomenon and the corresponding temperature range. Based on this, the key reactions in the combustion of MMY under different conditions were elucidated through sensitivity analysis. Ultimately, the model validation was conducted against the high-temperature IDT data from the literature. Novelty and significance statement The chemical kinetic models of various biodiesels are essential for simulating the working process of internal combustion engines and accurately predicting the combustion and emission characteristics. Among these, the autoignition characteristic is one of the most important parameters for model validation. Besides, the carbon chain length of methyl myristate closely resembles that of real biodiesels, making it an ideal surrogate fuel for biodiesels. In this study, the IDTs of MMY were measured for the first time at low-to-intermediate temperatures in a heated RCM, thereby experimentally confirming the NTC phenomenon of methyl myristate. Additionally, a skeletal model of MMY was developed based on the idea of decoupling methodology, which can accurately predict the autoignition characteristics of MMY at low-to-intermediate temperatures. The simulated values demonstrate good agreement with experimental data. Overall, the present study provides an IDT database for the development and validation of the methyl myristate mechanism.

Experimental and kinetic modeling study of extinction and ignition of methyl decanoate in laminar non-premixed flows

Direct numerical simulations of rich premixed turbulent n-dodecane/air flames at diesel engine conditions

Experimental Study and Kinetic Modeling for the Laminar Flame Speed of Methyl Octanoate and N-Nonane

On the Spherically Symmetrical Combustion of Methyl Decanoate Droplets and Comparisons with Detailed Numerical Modeling

An Experimental and Kinetic Modeling Study of Premixed Laminar Flames of Methyl Pentanoate and Methyl Hexanoate

Skeletal Mechanism Construction for Heavy Saturated Methyl Esters in Real Biodiesel Fuels

Towards High-Level Theoretical Studies of Large Biodiesel Molecules: an ONIOM/RRKM/Master-equation Approach to the Isomerization and Dissociation Kinetics of Methyl Decanoate Radicals

Low-to-intermediate temperature autoignition of methyl myristate: Ignition delay time measurement and skeletal model development

Numerical Study of the Effects of Biodiesel Unsaturation on Combustion and Emission Characteristics in Diesel Engine

SKELETAL MECHANISM CONSTRUCTION FOR METHYL OLEATE IN REAL BIODIESEL FUELS

Machine Learning Tabulation of Thermochemistry for Turbulent Dimethyl Ether (dme) Flames

Experimental and modeling study on oxidation of n-decane and its mixtures with 1,2,4-trimethylbenzene

Construction of a compact skeletal mechanism for acetone–n–butanol–ethanol (ABE)/diesel blends combustion in engines using a decoupling methodology

Binary diffusion coefficient of methyl decanoate and its impact on non-premixed flame extinction: A molecular dynamics study

The effect of the unsaturation degree on the gas-phase autoignition of methyl oleate and methyl linoleate: Experimental and modeling study

Experimental and numerical study of soot volume fraction and number density in laminar co-flow diffusion flames of n-decane/n-butanol blends

Kinetic investigations on the β-scission reactions of hydroperoxy methyl-ester radicals and the concerted HO 2 elimination reactions of methyl-ester peroxy radicals: Implication for low-temperature combustion modeling of methyl esters

An Experimental and Kinetic Modeling Study on Dimethyl Carbonate (dmc) Pyrolysis and Combustion

Investigation on N-Decane-hydrogen Laminar Combustion Characteristics Using the Constant Volume Combustion Method

Experimental study and prediction model of combustion stability and combustion mode variation of burning methanol/biodiesel blends for diesel engines

A new skeletal kinetic model for methanol/ n-heptane dual fuels under engine-like conditions