Abstract:Epoxy/Al as a functional structural energetic composite material that can be used as an adhesive, energetic fragments and warhead shells due to its high energy density, low density, and high strength. It can release a large amount of chemical energy (about 21.36 kJ/g) through chemical reactions when subjected to high-speed impact and thermal stimulation. Whether used as a matrix or auxiliary component, it has enormous development potential. Therefore, it is particularly important to study the mechanical properties of Epoxy/Al energetic composite materials under different temperature environments and strain rates of loading. This article describes the preparation of Epoxy/Al specimens with a mass percentage of 70%–30% using vacuum curing after 24 h under 0.8 Bar and 50 °C. The mechanical properties of Epoxy/Al specimens under different loading conditions were characterized using a high and low temperature universal testing machine and a separate Hopkinson experimental system. The modulus prediction method of binary composite materials was improved by combining SEM (scanning electron microscopy) and microstructure, and an adaptive constitutive model was developed combined with the K Srinivas model and neural network model based on the Sherwood Frost empirical constitutive relationship. The results show that Epoxy/Al energetic composite material has a significant temperature effect. When the temperature exceeds 100 °C, Epoxy/Al energetic composite material will be a significant physical and chemical property transition (the specimen exhibits viscous fluid characteristics and gradually begins to slowly decompose). As the temperature decreases, the specimen gradually exhibits a certain degree of brittleness and strength is improved. Due to the deformation, displacement, and interfacial debonding of internal particles during the loading process, Epoxy/Al materials exhibit excellent impact energy absorption effects, with energy absorption reaching 15.30 MJ/m 3 at room temperature, and unit mass cost much lower than popular CFRP (carbon fiber-reinforced polymer) materials (CFRP energy absorption cost is 0.268 J/g/£, while Epoxy/Al materials do not exceed 0.013 J/g/£). During the dynamic loading process, Epoxy/Al energetic composite materials exhibit a phenomenon of structural reconstruction and enhancement throughout the entire loading process. The maximum strength at room temperature can reach 240.70 MPa, which is superior to all existing energetic materials of the same type. By introducing interface effects and quantifying them in the Halpin Tsai model, the existing prediction method for the Young's modulus of binary particle added composite materials has been effectively improved, reducing the prediction error of the Young's modulus of Epoxy/Al energetic composite materials from 14.2% to 2.4%. The numerical simulation results indicate that the newly developed constitutive model has high accuracy and can better reflect the mechanical properties of Epoxy/Al materials. The development method of this constitutive model has a positive contribution to the development of composite materials.

A Binary Resin System of Epoxy and Phenol-Formaldehyde for Improving the Thermo-Mechanical Behavior of FRP Composites

Preparation of glass fiber reinforced phenolic injection molding materials and its properties

Time‐temperature‐transformation Diagram of Modified Resol Phenolic Resin and the Thermomechanical Performance of Resol Phenolic Resin/glass Fabric Composite

Dynamic reversible mechanism of phenol-carbamate bonds and their potential for the development of thermo-healing, recyclable and high-performance epoxy thermosets

Study on the Curing Behavior of Polythiol/phenolic/epoxy Resin and the Mechanical and Thermal Properties of the Composites

Environment friendly waste-water-free and thermally conductive phenolic resin modified with polysulfone

Copolymerizing Behavior and Processability of Benzoxazine/epoxy Systems and Their Applications for Glass Fiber Composite Laminates

Design of the Phthalonitrile-Based Composite Laminates by Improving the Interfacial Compatibility and Their Enhanced Properties

Improving Tensile Properties of Glass Fiber-Reinforced Epoxy Resin Composites Based on Enhanced Multiphase Structure: the Modification of Resin Systems and Glass Fibers

Design of Low Temperature Self-Cured Phthalonitrile-Based Polymers for Advanced Glass Fiber Composite Laminates

Structural and Thermal Behavior of a Novel Phenolic Resin and Its Composite with Excellent Ablative Performance

High-performance Biobased Vinyl Ester Resin and Its Fiberglass-Reinforced Composite with High Glass Transition Temperature (tg), Excellent Flame Retardancy and Mechanical Properties

Molecular mechanics-based design of high-modulus epoxy to enhance composite compressive properties

Synthesis of Epoxy Resin Based on Biphenyl Structure for Application in Carbon Fiber-Reinforced Composites

Influence of Long-Term Moisture Exposure and Temperature on the Mechanical Properties of Hybrid FRP Composite Specimens

Synthesis And Characterization Of Phenolic Resins Containing Aryl-Boron Backbone And Their Utilization In Polymeric Composites With Improved Thermal And Mechanical Properties

Studies on the Modification of Commercial Bisphenol-A-Based Epoxy Resin Using Different Multifunctional Epoxy Systems

Designing and Preparation of Fiber-Reinforced Composites with Enhanced Interface Adhesion

Mechanical behavior and optimization of constitutive prediction model for Epoxy/Al energetic composite materials considering temperature and strain rate effects

Development and characterization of kevlar and glass fibers reinforced epoxy/vinyl ester hybrid resin composites

Modification on Glass Fiber Surface and Their Improved Properties of Fiber-Reinforced Composites Via Enhanced Interfacial Properties