Abstract:This study presents an efficient approach to generate a realistic micromechanical model for closed-cell foams using irregular Voronoi models. Starting with a reference microstructure consisting of regular Kelvin cells, the nucleating points underlying each reference unit cell is subjected to a random displacement, the magnitude of which depends on the pore size and a misalignment parameter. For convenience, the misalignment parameter is calibrated from available statistical data on unit cell geometries for the commercially available closed-cell aluminium foam, and a common value is utilised for all cases considered. Numerical analyses with the irregular 3D micromechanical models are done using ABAQUS/Explicit. Considering both uniaxial and hydrostatic compressive loading cases, the numerical responses compare well with the experimental data in literature, over a wide range of relative densities. The deformation mechanism is next elaborated. In uniaxial compression, the deformation initiates at the weaker regions induced by the geometrical irregularities, before evolving into a localized deformation band through the coalescence between neighbouring regions of local weakness. This localized deformation band forms an irregular 3D relief in space, a phenomenon which cannot be captured by regular periodic microstructures. In hydrostatic compression, the irregular geometry also induces deformation through cell wall bending. In tension, a stretching mode induces a shift in the yield surface towards the positive mean stress quadrant, which is consistent with experimental observations. The proposed approach thus generates the irregular 3D microstructures efficiently through a single calibrated misalignment parameter, leading to realistic deformation mechanisms, with good predictions on the macroscopic behaviour, over a wide range of relative densities and different loading conditions.

Compression Behavior of Metal Foams with Real Pore Structures Through CT Scan Images

Comparative study of several different modeling methods for clossed- cell metal foam

Construction and deformation behavior of metal foam based on a 3D-Voronoi model with real pore structure

Investigations of the failure behaviors of open-cell copper foam based on in-situ X-ray tomography compression experiments and image reconstructed finite element modeling

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Micromechanical Modeling on Compressive Behavior of Foamed Concrete

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Structural Modeling and Mechanical Behavior of Metal-Porous-Polymer-Composites (mppcs) with Different Polymer Volume Fractions

Research on Microstructure Evolution and Deformation for Closed-Cell Aluminium Foams in Compression by SXR-CT Technique

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Pore Scale Investigation of Heat Conduction of High Porosity Open-Cell Metal Foam/Paraffin Composite

An Analytical Stress-Strain Model for Open-Cell Metal Foam

Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography

Three-dimensional modeling of the mechanical property of linearly elastic open cell foams

Fundamental mechanical relations of open-cell metal foam composite materials with reticular porous structure

Internal microstructure evolution of aluminum foams under compression

Microstructural Influence on Compressive Behavior and Strain Rate Sensitivity of Open-Cell Nickel Foam

A new modelling method for open cell foam structure based on centroidal and capacity constraint power diagram

Three Dimensional Modelling of Closed-Cell Aluminium Foams with Predictive Macroscopic Behaviour

Numerical Study Of Heat Conduction Of High Porosity Open-Cell Metal Foam/Paraffin Composite At Pore Scale

High temperature and mesostructure effect on aluminum foam compression responses