Abstract:Over millennia nature has produced composite materials with excellent mechanical properties compared to the low properties of their base materials and has managed to obtain a good compatibility between stiffness and toughness; as a result, they are a good source of inspiration for material optimization for applications, such as increasing toughness and damage resistance, something that is difficult in conventional engineering materials. Nowadays eight structural elements are identified in biological materials: fibrous, helicoidal, gradients, layered, tubular, cellular, suture, and overlapping. Helical structures consist of stacks of ordered fibers that form layers that are rotated at a constant angle of inclination. These include plywood and Bouligand structures. Bouligand structures consist of an arrangement of fibrous laminates that completes a 180° turn and provides some biological materials with increased strength and toughness in multiple directions and exceptionally high fracture toughness. The classical composite materials mechanics provides some constitutive model approximations for this type of materials, but they still need to be studied and tested to properly understand their behavior. Injection molding, compression molding, hand layup, resin transfer molding, filament winding, pultrusion, and automated fiber placement are just a few of the traditional methods used to make fiber-reinforced polymer composites (FRPC). However, these traditional manufacturing techniques have a restriction on specific fiber alignment and demand expensive molds, dies, or lithographic masks. Additive manufacturing has the potential to replace many conventional manufacturing processes due to its ability to create complex geometries with customizable material properties and employ several materials simultaneously, among other things. Fused deposition modeling (FDM) is the most widely used manufacturing additive technique for manufacturing FRPC due to its low cost, low energy input, material consumption, and operation simplicity. This work presents three-dimensional models mimicking the Bouligand structures by turning the pitch angle of the layers and a analytical models comparison were made. The specimens were fabricated using the FDM technique. A thermoplastic polyurethane (TPU) was used for the matrix and polylactic acid (PLA) for the fibers. Tensile tests were used to mechanically characterize both the raw materials and the manufactured composites to examine the impact of the helical angle and the contribution of the matrix and fiber materials to the stiffness and toughness of the composite. Experiments and analysis revealed that high rotation angles improve the stiffness, strength, and toughness of the composite.

Three-dimensional Printing of Biomimetic Variable Stiffness Composites with Controlled Orientations and Volume Fraction of Fibers

A Modeling Method of Continuous Fiber Paths for Additive Manufacturing (3D Printing) of Variable Stiffness Composite Structures

3D printing of curvilinear fiber reinforced variable stiffness composite structures: A review

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Morphing characteristics and damage analysis of 3D printing variable stiffness bistable laminates based on continuous fiber thermosetting composites

A Constitutive Model for 3D Printed Continuous Fiber Reinforced Composite Structures with Variable Fiber Content

Progressive concurrent topological optimization with variable fiber orientation and content for 3D printed continuous fiber reinforced polymer composites

A Phase-Field Framework for Failure Modeling of Variable Stiffness Composite Laminae

An investigation into mechanical properties of a 3D printed two-matrix continuous fiber composites with multi-cavity structure

Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces

Exceptional mechanical performance by spatial printing with continuous fiber: Curved slicing, toolpath generation and physical verification

3D printing of continuous carbon fibre reinforced polymer composites with optimised structural topology and fibre orientation

Design and Analysis of Multistable Curvilinear-fiber Laminates Based on Continuous Fiber 3D Printing of Thermosetting Resin Matrix

Fabrication of Bamboo-Inspired Continuous Carbon Fiber-Reinforced SiC Composites Via Dual-Material Thermally Assisted Extrusion-Based 3D Printing

Programmable Morphing Composites with Embedded Continuous Fibers by 4D Printing

Optimization design and 3D printing of curvilinear fiber reinforced variable stiffness composites based on polar coordinate sweeping

Process-dependent Multiscale Modeling for 3D Printing of Continuous Fiber-reinforced Composites

An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: In-melt simultaneous impregnation

Selectively embedding multiple spatially steered fibers in polymer composite parts made using vat photopolymerization

Fiber Angle influence and Toughness characterization of bioinspired discontinuous fiber helicoids composite materials produced via additive manufacturing

Mechanical Characterization and Production of Various Shapes Using Continuous Carbon Fiber-Reinforced Thermoset Resin-Based 3D Printing