Abstract:The integration of fibers offers a means to fabricate intricate, load-bearing architectural configurations that were previously challenging to achieve with conventional 3D printed concrete. This study investigates the incorporation of recycled plastic fibers (RPFs) derived from polyethylene terephthalate (PET) and polypropylene (PP) to enhance the mechanical properties of 3D printed cementitious composites (3DPCC). Two distinct fiber lengths, 6 mm and 12 mm, were utilized for each fiber type across various fiber volume fractions ranging from 0.3 % to 1.5 % of the mortar volume. The results show that the optimal volume fractions are 1 % for 6 mm fibers and 0.7 % for 12 mm fibers. The findings indicate that hybrid combinations of PP and PET fibers achieve superior mechanical characteristics compared to the use of individual fiber types. The assessment of fresh mortar properties included fluidity, buildability, and extrudability, along with the evaluation of compressive and flexural strength as indicators of mechanical properties. Additionally, this study assessed the influence of a hybrid fiber mix comprising 40 % PP and 60 % PET of the 6 mm fiber length volume fraction, which exhibited the highest average compressive (20.6 %) and flexural strength (44.9 %) in the Z direction for 3DPCC, surpassing the performance of individual PP and PET fibers at the same volume fraction across all the volume ratios. When 12 mm fibers were utilized, the compressive and flexural strengths in the Z direction increased by 20.8 % and 46.7 %, respectively, for a mix of 20 % PP and 80 % PET of the total volume fraction. Concerning buildability, the control sample achieved a maximum of 29 layers, whereas the addition of 1.5 % PET fibers at 12 mm enabled the structure to reach 48 layers.

Utilization potential of steel fibers in 3D printed functionally graded cementitious composite: An experimental approach

On-demand additive manufacturing of functionally graded concrete

Mechanical and macrostructural properties of 3D printed concrete dosed with steel fibers under different loading direction

3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials: From Mixture Design to Printability Evaluation

Modification effect of nanosilica and polypropylene fiber for extrusion-based 3D printing concrete: Printability and mechanical anisotropy

Effect of Reinforcement Configurations on the Flexural Behaviors of 3D Printed Fiber Reinforced Cementitious Composite (FRCC) Beams

Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET Fibers

State-of-the-art of Mechanical Properties of 3D Printed Concrete

Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High Performance Concrete

Properties of 3D-Printable Ductile Fibre-Reinforced Geopolymer Composite for Digital Construction Applications

PVA Fibre Reinforced High-Strength Cementitious Composite for 3D Printing: Mechanical Properties and Durability

Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials

Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction

3D-Printed LC3-based Lightweight Engineered Cementitious Composites: Fresh State, Harden Material Properties and Beam Performance

Steel Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate

Mechanical Properties of Structures 3D Printed with Cementitious Powders

A Numerical Study on 3D Printed Cementitious Composites Mixes Subjected to Axial Compression

Study of 3D printed concrete with low-carbon cementitious materials based on its rheological properties and mechanical performances

Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multimodal Analysis

Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials

Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction