Abstract:Methane dry reforming, co-converting greenhouse gases CH4 and CO2 into chemically active syngas (H2/CO), affords a promising route for producing chemicals and fuels from carbon resources. Ni catalysts are the most active for this reaction but suffer from the dilemma of rapid deactivation caused by metal sintering at higher temperatures (>973 K) or coke accumulation at relatively lower temperatures (673–973 K). Here, we report a catalyst configuration—Ni particles (15 nm) confined by a 1–2 nm-thick multielement-oxide (MEO) layer—allows a stable operation at 873–1073 K with a stoichiometric CH4/CO2 ratio of 1.0, that is, the severe conditions for catalyst deactivation but of industrial interest for process efficiency and atomic economy. The in situ-evolved MEO layer resembles the property of high-entropy oxide, which stabilizes the Ni particles with appropriate size and high-index facets, even at 1173 K. Meanwhile, in situ TEM under near atmospheric pressure combining intelligent gravity analysis (IGA)-mass spectrometry (MS) characterizations prove that this unique structure balanced the activation of CH4 and CO2. Thus, the lifetime of the catalyst has been efficiently prolonged with nearly coke-free operations, even at 873 K, the most severe coking temperature. This high-entropy design and stabilization effect offers a facile strategy to precisely fabricate active and robust metal catalysts with wide operation temperatures for many challenging reactions.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c02995.Structural characterizations, in situ experiments, and the comparison of catalytic performances under MDR reactions conditions of OxNi and the reference Ni catalysts (PDF)In situ TEM observations for the OxNi catalyst carried out over ARM 300F using an insitu sample holder (MP4)In situ TEM observations for the OxNi catalyst carried out at 1173 K with the pressure of 760 mbar (MP4)In situ TEM observations for the reference Ni catalyst carried out at 1173 K with the pressure of 760 mbar in a CH4 atmosphere (MP4)This article has not yet been cited by other publications.

Anti-coking NiCe /HAP Catalyst with Well-Balanced Carbon Formation and Gasification in Methane Dry Reforming

Rational design of nickel-based catalyst coupling with combined methane reforming to steadily produce syngas

Improving the Anti-Coking Ability in the Ni-M(M = Ce, Zr, Co)@SiO2 Yolk-Shell Catalysts for Dry Reforming of Methane

Ni/CeO2 Catalyst Prepared via Microimpinging Stream Reactor with High Catalytic Performance for CO2 Dry Reforming Methane

Strong metal-support interaction induced sintering-resistant Ni nanoparticles supported on highly CO 2 -activating vanadium hydroxyapatite for dry reforming of methane

Enhanced activity and stability of Ce-doped PrCrO3-supported nickel catalyst for dry reforming of methane

Improving the anti-coking ability in the Ni-M(M = Ce, Zr, Co)@SiO 2 yolk-shell catalysts for dry reforming of methane

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Promoting Methane Dry Reforming over Ni Catalysts Via Modulating Surface Electronic Structures of BN Supports by Doping Carbon

Ni/Ce0.9Eu0.1O1.95 with enhanced coke resistance for dry reforming of methane

Lamellar cross-linking Ni/CeO 2 as an efficient and durable catalyst for dry reforming of methane

Nickel Catalyst with Atomically-Thin Meshed Cobalt Coating for Improved Durability in Dry Reforming of Methane

Preparing a Zr-Doped CeO 2 Nanorod to Improve the Catalytic Performance of the Ni-Based Catalyst for Dry Reforming of Methane by Enhancing Oxygen Supply

Co–Ni Alloy Supported on CeO2 As a Bimetallic Catalyst for Dry Reforming of Methane

Improved performance of Ni/Al2O3 catalyst deriving from the hydrotalcite precursor synthesized on Al2O3 support for dry reforming of methane

Controllable Preparation of Nano-Ni to Eliminate Step Edges of Carbon Deposition on Ni-Based Catalysts for Methane Dry Reforming

Improving Catalytic Stability and Coke Resistance of Ni/Al2O3 Catalysts with Ce Promoter for Relatively Low Temperature Dry Reforming of Methane Reaction

Reducing Carbon Deposition and Enhancing Reaction Stability by Ceria for Methane Dry Reforming over Ni@SiO2@CeO2 Catalyst

The influence of alkaline promoters on the properties of the Ni/HAp catalyst in the methane dry reforming reaction

Hollow Hierarchical Ni/MgO-SiO2 Catalyst with High Activity, Thermal Stability and Coking Resistance for Catalytic Dry Reforming of Methane

Recent advances in promoting dry reforming of methane of Nickel-based catalysts