Abstract:Aiming at obtaining an efficient and accurate multiscale model of suspension bridges, this paper innovatively proposed a multiscale modeling and updating framework based on measured modal frequencies and influence lines. In the first step, a multiscale model was created using the substructure method and the multipoint constraint method. The second step was to use the Gaussian process metamodel to perform multiscale model updating. For a suspension bridge with a flat steel box girder, a global model was created primarily using beam and truss elements, and the flat steel box girder of the critical section was finely modeled using shell elements. However, the refined model of the girder has many degrees of freedom. To reduce the computations, the substructure method was used to condense the refined model into a superelement. According to the multipoint constraint method based on deformation compatibility, the superelement and global model were coupled together to create a multiscale model. In terms of model updating, the theory of objective function construction based on the modal frequencies and influence lines was introduced first. Then, the trained Gaussian process model could replace the multiscale model to fit the relationship between the updated parameters and the objective function. Finally, the optimization algorithm was used to obtain the minimum value of the objective function. A case study of a suspension bridge was considered to demonstrate the effectiveness of the proposed framework. The measured deflection and strain influence lines of the bridge were obtained via a bridge moving vehicle test, and the modal frequencies of the bridge were obtained using environmental excitation. Using the proposed framework, the updated frequencies and influence lines were closer to the measured frequencies, and the computational efficiency was improved. Therefore, the proposed method could efficiently and accurately build a multiscale model of a suspension bridge.

Influence Lines-Based Model Updating of Suspension Bridges Considering Boundary Conditions

Model Updating Using Bridge Influence Lines Based on an Adaptive Metamodel Global Optimization Method

A Multiscale Modeling and Updating Framework for Suspension Bridges Based on Modal Frequencies and Influence Lines

FE Model Updating on an In-Service Self-Anchored Suspension Bridge with Extra-Width Using Hybrid Method

Method Suitable for Updating the Boundary Condition of Continuous Beam Bridges

Bayesian Finite-Element Model Updating of Bridges Considering Boundary Condition Uncertainties

Finite Element Model Updating of Bridge Structures Based on Sensitivity Analysis and Optimization Algorithm

SENSITIVITY-BASED FE MODEL UPDATING OF A SUSPENSION BRIDGE

Finite Element Model Updating of Bridge Structures Based on Improved Response Surface Methods

Finite Element Model Updating for a Cable-stayed Bridge Considering the Boundary Condition Constraint and Parameter Sensitivity

Static Finite Element Model Updating for Special-Shaped Bridge Based on Uniform Design Method

FINITE ELEMENT MODEL UPDATING FOR A RIGID FRAME-CONTINUOUS GIRDERS BRIDGE BASED ON RESPONSE SURFACE METHOD

Concurrent Multi-Scale Modelling and Updating of Long-Span Bridges Using a Multi-Objective Optimisation Technique

Fe Model Updating Of Suspension Bridge Based On Vibration Measurements

Time history analysis-based nonlinear finite element model updating for a long-span cable-stayed bridge

Progressive finite element model calibration of a long-span suspension bridge based on ambient vibration and static measurements

Updating of Dynamic Model for Long-Span Bridges Based on Structural Sensitivity Analysis and Optimization Design Principle

Bridge finite element model updating using stochastic vehicle-induced static response monitoring data

Finite element model updating method for continuous girder bridges using monitoring responses and traffic videos

Finite Element Model Updating and Validating of Runyang Suspension Bridge Based on SHMS

Static and Dynamic Finite Element Model Updating of A Rigid Frame-Continuous Girders Bridge Based on Response Surface Method