Abstract:Thus far, the finite element model updating (FEMU) theory has been employed to address parameter errors between finite element models (FEMs) and actual structures. However, previous studies involving multiobjective optimization based on the FEMU of bridges focused on engineering experience or Euclidean distance alone, which affords a less efficient solution with less recognizability. To address this issue, in this work, an innovative two-phase model updating technique was developed to accurately evaluate a long-service-life cable-stayed bridge strengthening scheme. During the first phase, a sensitivity analysis was performed to determine the main updating parameters. Subsequently, the updating process was developed into a multiobjective optimization problem with the establishment of an objective function, which was solved using an improved genetic algorithm (GA). During the second phase, the ELECTRE-III method was introduced to rank the Pareto front from the first stage and determine the final updating results. Additionally, the impact of the mesh sizes of the finite element model (FEM) on the updating process was analyzed. The relative differences between the original numerical results and the elevation measurements reached 20.5 % and 25.0 %, which were then reduced to 11.7 % and 11.9 %, respectively, after the updating process. Results revealed that the updating process considerably improved the accuracy of the FEM. Based on the updated FEM, the structural responses of the Shengli Yellow River Bridge were evaluated in different cable and bolt replacement schemes. Considering construction progress and safety, optimal strengthening schemes were selected and successfully applied to the actual Shengli Yellow River Bridge reinforcement project. This work and its results are expected to serve as a reference for the effective evaluation of long-service-life cable-stayed bridge strengthening schemes.

SENSITIVITY-BASED FE MODEL UPDATING OF A SUSPENSION BRIDGE

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

FE-based Bridge Weigh-in-motion Based on an Adaptive Augmented Kalman Filter

Bridge finite element model updating using stochastic vehicle-induced static response monitoring data

Finite element model updating method for continuous girder bridges using monitoring responses and traffic videos

A sensitivity-based nonlinear finite element model updating method for nonlinear engineering structures

Bridge Model Updating Based on Wavelet Neural Network and Wind-Driven Optimization

Vibration-based Bayesian model updating of an actual steel truss bridge subjected to incremental damage

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Time history analysis-based nonlinear finite element model updating for a long-span cable-stayed bridge

Finite element model of a cable-stayed bridge updated with vibration measurements and its application to investigate the variation of modal frequencies in monitoring

Model Updating Concept Using Bridge Weigh-in-Motion Data

AN APPLICATION OF MULTISTAGE MODEL UPDATING BASED ON OPTIMIZATION THEORY TO THE SAFETY APPRAISAL OF BRIDGE

A Multiscale Finite Element Model Validation Method of Composite Cable-Stayed Bridge Based on Structural Health Monitoring System

Estimation Of Deflections Of Bridge By Two-Step Model Updating Approach Based On Ambient Acceleration Measurements

Practical model updating of the Ting Kau Bridge through the MCMC-based Bayesian algorithm utilizing measured modal parameters

Model updating of a bridge structure using vibration test data based on GMPSO and BPNN: case study

Evaluation of long-service-life cable-stayed bridge strengthening schemes using a two-phase finite element model updating technology

Benchmark model updating for cable stayed bridges

Mechanical State Assessment of In-Service Cable-Stayed Bridge Using a Two-Phase Model Updating Technology and Periodic Field Measurements