Abstract:Thus far, the finite element model updating (FEMU) theory has been employed to address parameter errors between finite element models (FEMs) and actual structures. However, previous studies involving multiobjective optimization based on the FEMU of bridges focused on engineering experience or Euclidean distance alone, which affords a less efficient solution with less recognizability. To address this issue, in this work, an innovative two-phase model updating technique was developed to accurately evaluate a long-service-life cable-stayed bridge strengthening scheme. During the first phase, a sensitivity analysis was performed to determine the main updating parameters. Subsequently, the updating process was developed into a multiobjective optimization problem with the establishment of an objective function, which was solved using an improved genetic algorithm (GA). During the second phase, the ELECTRE-III method was introduced to rank the Pareto front from the first stage and determine the final updating results. Additionally, the impact of the mesh sizes of the finite element model (FEM) on the updating process was analyzed. The relative differences between the original numerical results and the elevation measurements reached 20.5 % and 25.0 %, which were then reduced to 11.7 % and 11.9 %, respectively, after the updating process. Results revealed that the updating process considerably improved the accuracy of the FEM. Based on the updated FEM, the structural responses of the Shengli Yellow River Bridge were evaluated in different cable and bolt replacement schemes. Considering construction progress and safety, optimal strengthening schemes were selected and successfully applied to the actual Shengli Yellow River Bridge reinforcement project. This work and its results are expected to serve as a reference for the effective evaluation of long-service-life cable-stayed bridge strengthening schemes.

Static Finite Element Model Updating for Special-Shaped Bridge Based on Uniform Design Method

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Bridge finite element model updating using stochastic vehicle-induced static response monitoring data

Finite element model updating method for continuous girder bridges using monitoring responses and traffic videos

Finite element model updating technique oriented to the bearing capacity improvement of bridges

Structural Finite Element Model Updating by Using Response Surfaces and Radial Basis Functions

Accurate FEM of Steel-Concrete Composite Box Girder Bridge for Damage Identification Based on Dynamical Experimental Study

Model Updating of Laboratorial Long-Span Cable-Stayed Bridge

Finite element modeling and model updating for a cable-stayed bridge

Updating of Bridge Finite Element Model Based on Optimization Design Theory

Finite Element Model Updating of Long-Span Cable-Stayed Bridge Based on the Response Surface Method of Radial Basis Function

Response-surface based on finite element model updating of bridge structures

Evaluation of long-service-life cable-stayed bridge strengthening schemes using a two-phase finite element model updating technology

Updating the finite element model of bridge structures by an improved Taguchi updating method

Structural-Health-Monitoring-Oriented Finite Element Model for a Specially Shaped Steel Arch Bridge and Its Application

Model Updating for Binzhou Yellow River Highway Bridge Considering Uncertainties

Virtual Distortion Method-Based Finite Element Model Updating of Bridges by Using Static Deformation

Updating the Finite Element Model of Large-Scaled Structures Using Component Mode Synthesis Technique.

Bridge Model Updating Based on Wavelet Neural Network and Wind-Driven Optimization

Updating of Finite Element Model in Considering Mode Errors with Fuzzy Theory