Abstract:Thus far, the finite element model updating (FEMU) theory has been employed to address parameter errors between finite element models (FEMs) and actual structures. However, previous studies involving multiobjective optimization based on the FEMU of bridges focused on engineering experience or Euclidean distance alone, which affords a less efficient solution with less recognizability. To address this issue, in this work, an innovative two-phase model updating technique was developed to accurately evaluate a long-service-life cable-stayed bridge strengthening scheme. During the first phase, a sensitivity analysis was performed to determine the main updating parameters. Subsequently, the updating process was developed into a multiobjective optimization problem with the establishment of an objective function, which was solved using an improved genetic algorithm (GA). During the second phase, the ELECTRE-III method was introduced to rank the Pareto front from the first stage and determine the final updating results. Additionally, the impact of the mesh sizes of the finite element model (FEM) on the updating process was analyzed. The relative differences between the original numerical results and the elevation measurements reached 20.5 % and 25.0 %, which were then reduced to 11.7 % and 11.9 %, respectively, after the updating process. Results revealed that the updating process considerably improved the accuracy of the FEM. Based on the updated FEM, the structural responses of the Shengli Yellow River Bridge were evaluated in different cable and bolt replacement schemes. Considering construction progress and safety, optimal strengthening schemes were selected and successfully applied to the actual Shengli Yellow River Bridge reinforcement project. This work and its results are expected to serve as a reference for the effective evaluation of long-service-life cable-stayed bridge strengthening schemes.

Virtual Distortion Method-Based Finite Element Model Updating of Bridges by Using Static Deformation

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Refined Finite Element Modeling of a Damaged Bridge with Virtual Distortion Method Coupling Solid Superelement

Hybrid element-based virtual distortion method for finite element model updating of bridges with wide-box girders

Updating the Finite Element Model of Large-Scaled Structures Using Component Mode Synthesis Technique.

Bridge finite element model updating using stochastic vehicle-induced static response monitoring data

Finite element model updating method for continuous girder bridges using monitoring responses and traffic videos

Finite element model updating technique oriented to the bearing capacity improvement of bridges

Updating of Bridge Finite Element Model Based on Optimization Design Theory

Structural Finite Element Model Updating by Using Response Surfaces and Radial Basis Functions

Research of Amended Finite Element Model of Bridges Based on Vibrating Measurement

An updating method suitable for finite element model updating of large-scakled structures

Finite element modeling and model updating for a cable-stayed bridge

Improved Finite Element Model Updating of a Highway Viaduct Using Acceleration and Strain Data

VIBRATION CHARACTERISTICS ANALYSIS OF CABLE-STAYED BRIDGES BY THE SUPER-ELEMENT METHOD

Updating the finite element model of bridge structures by an improved Taguchi updating method

Bridge Model Updating Based on Wavelet Neural Network and Wind-Driven Optimization

Accurate FEM of Steel-Concrete Composite Box Girder Bridge for Damage Identification Based on Dynamical Experimental Study

Evaluation of long-service-life cable-stayed bridge strengthening schemes using a two-phase finite element model updating technology

Model Updating of Laboratorial Long-Span Cable-Stayed Bridge