Abstract:Aging, corrosive environments, and inadequate maintenance may result in performance deterioration of civil infrastructures, and finite element model updating is a commonly employed structural health monitoring procedure in civil engineering to reflect the current situation and to ensure the safety and serviceability of structures. Using the finite element model updating process to obtain the relationship between the structural responses and updating parameters, this paper proposes a method of using the wavelet neural network (WNN) as the surrogate model combined with the wind-driven optimization (WDO) algorithm to update the structural finite element model. The method was applied to finite element model updating of a continuous beam structure of three equal spans to verify its feasibility, the results show that the WNN can reflect the nonlinear relationship between structural responses and the parameters and has an outstanding simulation performance; the WDO has an excellent ability for optimization and can effectively improve the efficiency of model updating. Finally, the method was applied to update a real bridge model, and the results show that the finite element model update based on WDO and WNN is applicable to the updating of a multi-parameter bridge model, which has practical significance in engineering and high efficiency in finite element model updating. The differences between the updated values and measured values are all within the range of 5%, while the maximum difference was reduced from −10.9% to −3.6%. The proposed finite element model updating method is applicable and practical for multi-parameter bridge model updating and has the advantages of high updating efficiency, reliability, and practical significance.

Structural Finite Element Model Updating by Using Response Surfaces and Radial Basis Functions

Response Surface–Based Finite-Element-Model Updating Using Structural Static Responses

Finite Element Model Updating of Bridge Structures Based on Improved Response Surface Methods

Bridge Model Updating Using Response Surface Method

Finite Element Model Updating of Long-Span Cable-Stayed Bridge Based on the Response Surface Method of Radial Basis Function

Response-surface based on finite element model updating of bridge structures

Static and dynamic finite element model updating of structures based on response surface method: theory and application

Fe Model Updating Of Bridge Based On High Order Response Surface Method

Static and Dynamic Finite Element Model Updating of A Rigid Frame-Continuous Girders Bridge Based on Response Surface Method

Structure Finite Element Model (FEM) Updating Based on Static-load Response Surface Methodology

Bridge Model Updating Using Response Surface Method and Genetic Algorithm

FINITE ELEMENT MODEL UPDATING FOR A RIGID FRAME-CONTINUOUS GIRDERS BRIDGE BASED ON RESPONSE SURFACE METHOD

Bridge Finite Element Model Updating Based on Uniform Design and Response Surface Method

Structural Characteristic Responses for Finite Element Model Updating of Structures

Finite element model validation of the continuous rigid frame bridge based on structural health monitoring Part I: FE model updating based on the response surface method

Static Finite Element Model Updating for Special-Shaped Bridge Based on Uniform Design Method

Bridge Model Updating Based on Wavelet Neural Network and Wind-Driven Optimization

Finite Element Model Updating Method of Bridge Combined Modal Flexibility and Static Displacement

Finite element model updating technique oriented to the bearing capacity improvement of bridges

Finite Element Model Updating of Canonica Bridge Using Experimental Modal Data and Genetic Algorithm

Finite Element Model Updating of Bridge Structures Based on Sensitivity Analysis and Optimization Algorithm