Abstract:Structural Health Monitoring, Ahead of Print. The expanding structural health monitoring (SHM) systems on bridge structures have provided an abundance of multi-source data for finite element model updating (FEMU). The SHM systems on bridges usually include surveillance cameras, vibration sensors (e.g., accelerometers, strain gauges, and displacement sensors), and sometimes a weight-in-motion (WIM) system. Currently, the majority of FEMU studies focus on identified modal parameters derived from vibration data, neglecting the incorporation of video and WIM data in the updating process, which impedes a thorough quantification of uncertainty associated with the structural parameters of interest. Therefore, this paper proposes a hierarchical Bayesian FEMU framework to comprehensively integrate a variety of information sources, including videos, WIM, and vibration data. The data features comprise the static deflections of the bridge under traffic load and modal parameters identified from acceleration measurements. The measured static deflections are extracted from raw displacement data using the locally weighted regression and smoothing scatterplots method. Computer vision-based technology is employed to pinpoint the location of vehicle load on the bridge, which is then integrated into a FEM to predict vehicle-load-induced static deflection. A two-stage Markov Chain Monte Carlo sampling approach is proposed to evaluate the high-dimensional posterior distribution efficiently. The effectiveness of the proposed method is demonstrated on a laboratory three-span bridge model. The results show that the hierarchical Bayesian FEMU can provide accurate estimation and uncertainty quantification on structural stiffness and mass parameters. The updated model accurately predicts both static deflection and modal parameters, exhibiting model-predicted variability in close alignment with the identified values for observed and unobserved responses. Remarkably, this holds true even for unseen loading conditions which are not included in the updating process. These observations validate the capability of the proposed method for multi-source data fusion and uncertainty quantification of real-world bridge structures under operational conditions.

Finite element model updating technique oriented to the bearing capacity improvement of bridges

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

FE-based Bridge Weigh-in-motion Based on an Adaptive Augmented Kalman Filter

Finite element model updating method for continuous girder bridges using monitoring responses and traffic videos

Bridge finite element model updating using stochastic vehicle-induced static response monitoring data

Evaluation of long-service-life cable-stayed bridge strengthening schemes using a two-phase finite element model updating technology

Accurate FEM of Steel-Concrete Composite Box Girder Bridge for Damage Identification Based on Dynamical Experimental Study

Bridge Model Updating Based on Wavelet Neural Network and Wind-Driven Optimization

Time history analysis-based nonlinear finite element model updating for a long-span cable-stayed bridge

Structural-Health-Monitoring-Oriented Finite Element Model for a Specially Shaped Steel Arch Bridge and Its Application

Improved Finite Element Model Updating of a Highway Viaduct Using Acceleration and Strain Data

Model Updating Concept Using Bridge Weigh-in-Motion Data

Vibration-based Bayesian model updating of an actual steel truss bridge subjected to incremental damage

Mechanical State Assessment of In-Service Cable-Stayed Bridge Using a Two-Phase Model Updating Technology and Periodic Field Measurements

AN APPLICATION OF MULTISTAGE MODEL UPDATING BASED ON OPTIMIZATION THEORY TO THE SAFETY APPRAISAL OF BRIDGE

Practical model updating of the Ting Kau Bridge through the MCMC-based Bayesian algorithm utilizing measured modal parameters

High-Efficiency Finite Element Model Updating of Bridge Structure Using a Novel Physics-Guided Neural Network

Improved bridge capacity rating methods based on system reliability assessment

A hierarchical Bayesian model updating method for bridge structures by fusing multi-source information