Vibration Tests of 3D Printed Satellite Structure Made of Lattice Sandwich Panels
Xiaoyu Zhang,Hao Zhou,Wenhua Shi,Fuming Zeng,Huizhong Zeng,Geng Chen
DOI: https://doi.org/10.2514/1.J057241
IF: 2.624
2018-01-01
AIAA Journal
Abstract:No AccessTechnical NoteVibration Tests of 3D Printed Satellite Structure Made of Lattice Sandwich PanelsXiaoyu Zhang, Hao Zhou, Wenhua Shi, Fuming Zeng, Huizhong Zeng and Geng ChenXiaoyu ZhangBeijing Institute of Spacecraft System Engineering, 100094 Beijing, People’s Republic of China*Engineer, Beijing Key Laboratory of Intelligent Space Robotic Systems Technology and Applications, Department of Mechanical System, CAST.Search for more papers by this author, Hao ZhouBeijing Institute of Spacecraft System Engineering, 100094 Beijing, People’s Republic of China†Ph.D., Beijing Key Laboratory of Intelligent Space Robotic Systems Technology and Applications, Department of Mechanical System, CAST; (Corresponding Author).Search for more papers by this author, Wenhua ShiBeijing Institute of Spacecraft System Engineering, 100094 Beijing, People’s Republic of China‡Researcher, Market Research Department, CAST.Search for more papers by this author, Fuming ZengBeijing Institute of Spacecraft System Engineering, 100094 Beijing, People’s Republic of China§Researcher, Department of Mechanical System, CAST.Search for more papers by this author, Huizhong ZengBeijing Institute of Spacecraft System Engineering, 100094 Beijing, People’s Republic of China*Engineer, Beijing Key Laboratory of Intelligent Space Robotic Systems Technology and Applications, Department of Mechanical System, CAST.Search for more papers by this author and Geng ChenRWTH Aachen University, 52068 Aachen, GermanyDr.-Ing., Chair and Institute for Materials Applications in Mechanical Engineering.Search for more papers by this authorPublished Online:29 Jun 2018https://doi.org/10.2514/1.J057241SectionsRead Now ToolsAdd to favoritesDownload citationTrack citations ShareShare onFacebookTwitterLinked InRedditEmail About References [1] Gibson L. J. and Ashby M. F., Cellular Solids: Structure and Properties, Cambridge Univ. Press, Cambridge, 1999, Chaps. 1–3, 9. doi:https://doi.org/10.1017/CBO9781139878326 Google Scholar[2] Schaedler T. A., Jacobsen A. J., Torrents A., Sorensen A. E., Lian J., Greer J. R., Valdevit L. and Carter W. B., “Ultralight Metallic Microlattices,” Science, Vol. 334, No. 6058, 2011, pp. 962–965. doi:https://doi.org/10.1126/science.1211649 SCIEAS 0036-8075 CrossrefGoogle Scholar[3] Yuan W., Song H. W., Wang X. and Huang C. G., “Experimental Investigation on Thermal Buckling Behavior of Truss-Core Sandwich Panels,” AIAA Journal, Vol. 53, No. 4, 2015, pp. 948–957. doi:https://doi.org/10.2514/1.J053246 AIAJAH 0001-1452 LinkGoogle Scholar[4] Sing S. L., Yeong W. Y., Wiria F. E. and Tay B. Y., “Characterization of Titanium Lattice Structures Fabricated by Selective Laser Melting Using an Adapted Compressive Test Method,” Experimental Mechanics, Vol. 56, No. 5, 2016, pp. 735–748. doi:https://doi.org/10.1007/s11340-015-0117-y EXMCAZ 0014-4851 CrossrefGoogle Scholar[5] Rashed M. G., Ashraf M., Mines R. A. W. and Hazell P. J., “Metallic Microlattice Materials: A Current State of the Art on Manufacturing, Mechanical Properties and Applications,” Materials and Design, Vol. 95, No. 5, 2016, pp. 518–533. doi:https://doi.org/10.1016/j.matdes.2016.01.146 MADSD2 0264-1275 CrossrefGoogle Scholar[6] Caulfield J., Karlsson A. M. and Sypeck D. J., “Crushing of a Textile Core Sandwich Panel,” AIAA Journal, Vol. 44, No. 6, 2006, pp. 1339–1344. doi:https://doi.org/10.2514/1.17156 AIAJAH 0001-1452 LinkGoogle Scholar[7] Deshpande V. S., Ashby M. F. and Fleck N. A., “Foam Topology: Bending Versus Stretching Dominated Architectures,” Acta Materialia, Vol. 49, No. 6, 2001, pp. 1035–1040. doi:https://doi.org/10.1016/S1359-6454(00)00379-7 ACMAFD 1359-6454 CrossrefGoogle Scholar[8] Wadley H. N. G., Fleck N. A. and Evans A. G., “Fabrication and Structural Performance of Periodic Cellular Metal Sandwich Structures,” Composites Science and Technology, Vol. 63, No. 16, 2003, pp. 2331–2343. doi:https://doi.org/10.1016/S0266-3538(03)00266-5 CSTCEH 0266-3538 CrossrefGoogle Scholar[9] Radford D. D., Fleck N. A. and Deshpande V. S., “The Response of Clamped Sandwich Beams Subjected to Shock Loading,” International Journal of Impact Engineering, Vol. 32, No. 6, 2006, pp. 968–987. doi:https://doi.org/10.1016/j.ijimpeng.2004.08.007 IJIED4 0734-743X CrossrefGoogle Scholar[10] Queheillalt D. T. and Wadley H. N. G., “Cellular Metal Lattices with Hollow Trusses,” Acta Materialia, Vol. 53, No. 2, 2005, pp. 303–313. doi:https://doi.org/10.1016/j.actamat.2004.09.024 ACMAFD 1359-6454 CrossrefGoogle Scholar[11] Tsopanos S., Mines R. A. W., McKown S., Shen Y., Cantwell W. J., Brooks W. and et al., “The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures,” Journal of Manufacturing Science and Engineering, Vol. 132, No. 4, 2010, Paper 041011. doi:https://doi.org/10.1115/1.4001743 CrossrefGoogle Scholar[12] Gibson I., Rosen D. W. and Stucker B., Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, Springer, New York, 2009, Chaps. 2, 5. doi:https://doi.org/10.1007/978-1-4419-1120-9 Google Scholar[13] Yan C., Hao L., Hussein A., Young P. and Huang J., “Microstructure and Mechanical Properties of Aluminium Alloy Cellular Lattice Structures Manufactured by Directmetal Laser Sintering,” Materials Science and Engineering: A, Vol. 628, 2015, pp. 238–246. doi:https://doi.org/10.1016/j.msea.2015.01.063 CrossrefGoogle Scholar[14] Fan F. L., Fang D. N. and Jing F. N., “Yield Surfaces and Micro-Failure Mechanism of Block Lattice Truss Materials,” Materials and Design, Vol. 29, No. 10, 2008, pp. 2038–2042. doi:https://doi.org/10.1016/j.matdes.2008.04.013 MADSD2 0264-1275 CrossrefGoogle Scholar[15] Tang M. and Pistorius P. C., “Anisotropic Mechanical Behavior of AlSi10Mg Parts Produced by Selective Laser Melting,” JOM: The Journal of the Minerals, Metals & Materials Society, Vol. 69, No. 3, 2017, pp. 1–7. doi:https://doi.org/10.1007/s11837-016-2230-5 CrossrefGoogle Scholar[16] Pearce M., Lund J., Lundin M. and Lundquist J., “Random Vibration Tests of the Anticoincidence System of the PAMELA Satellite Experiment,” Nuclear Instruments and Methods in Physics Research A, Vol. 488, No. 3, 2002, pp. 536–542. doi:https://doi.org/10.1016/S0168-9002(02)00562-4 CrossrefGoogle Scholar[17] Krishna Murty A. V. and Viswa Murty G., “Design Modifications in Vibration Problems,” Journal of spacecraft and Rockets, Vol. 5, No. 7, 1968, pp. 870–872. doi:https://doi.org/10.2514/3.29378 JSCRAG 0022-4650 LinkGoogle Scholar[18] Nagaraj V. T., “Changes in the Vibration Characteristics due to Changes in the Structure,” Journal of Spacecraft and Rockets, Vol. 7, No. 12, 1970, pp. 1499–1501. doi:https://doi.org/10.2514/3.30209 JSCRAG 0022-4650 LinkGoogle Scholar Previous article Next article FiguresReferencesRelatedDetailsCited byAdditive Manufacturing for Lightweighting Satellite Platform22 February 2023 | Applied Sciences, Vol. 13, No. 5Softening-spring nonlinearity in large amplitude vibration of unsymmetric double-layer lattice truss core sandwich beamsThin-Walled Structures, Vol. 182Research on the Lightweight Design of an Aircraft Support Based on Lattice-Filled Structures2 December 2022 | Mathematics, Vol. 10, No. 23Resonance frequency prediction approach of lattice structure fabricated by selective laser melting30 May 2022 | Advances in Astronautics Science and Technology, Vol. 5, No. 4Research on Pressurized Structure Based on Lattice Truss Sandwich24 July 2022 | Advances in Astronautics Science and Technology, Vol. 5, No. 42D Elasticity solution for sandwich panels with functionally graded lattice coresComposite Structures, Vol. 300Additively Manufactured Lattice Truss Sandwich Cylinder and Free Vibration Behaviors20 May 2022 | International Journal of Structural Stability and Dynamics, Vol. 22, No. 13Shock-Induced Vibration of Composite Truss Core Sandwich Plates with Distributed Nonlinear Absorbers by Optimal Locations6 August 2022 | Actuators, Vol. 11, No. 8Structural modeling of sandwich panels with additively manufactured strut-based lattice coresAdditive Manufacturing, Vol. 55Vibration of a Satellite Structure with Composite Lattice Truss Core Sandwich PanelsGe Qi, Li Ma , Mayara Bortolotti Rossini and Kai-Uwe Schröder1 March 2022 | AIAA Journal, Vol. 60, No. 6Deep learning-based X-ray computed tomography image reconstruction and prediction of compression behavior of 3D printed lattice structuresAdditive Manufacturing, Vol. 54Thermal and Structural Performance of a Small Satellite with Networked Oscillating Heat PipesNaoko Iwata , Masanori Saitoh, Keiichi Yanagase, Yasuhiro Iso, Yukio Inoue, Hiroyuki Ogawa and Yoshiro Miyazaki20 February 2022 | Journal of Spacecraft and Rockets, Vol. 59, No. 3A multiscale topological design method of geometrically asymmetric porous sandwich structures for minimizing dynamic complianceMaterials & Design, Vol. 214Fabrication of triangular corrugated structure using 3D printed continuous carbon fiber-reinforced thermosetting epoxy compositesPolymer Testing, Vol. 106Investigation on the modelling approach for variable-density lattice structures fabricated using selective laser meltingMaterials & Design, Vol. 212Metal Additive Manufacturing for Satellites and Rockets17 December 2021 | Applied Sciences, Vol. 11, No. 24Nonlinear vibratory properties of additive manufactured continuous carbon fiber reinforced polymer composites4 August 2021 | The International Journal of Advanced Manufacturing Technology, Vol. 117, No. 3-4On the attenuation of vibration using a finite periodic array of rods comprised of either symmetric or asymmetric cellsJournal of Sound and Vibration, Vol. 511Vibration characteristics of simply supported pyramidal lattice sandwich plates on elastic foundation: Theory and experimentsThin-Walled Structures, Vol. 166A review of the recent trends on core structures and impact response of sandwich panels1 February 2021 | Journal of Composite Materials, Vol. 55, No. 18Equivalent continuum method of plane-stress dominated plate-lattice materialsThin-Walled Structures, Vol. 164Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle componentsChinese Journal of Aeronautics, Vol. 34, No. 5Effective strut-based design approach of multi-shaped lattices using equivalent material properties24 March 2021 | Journal of Mechanical Science and Technology, Vol. 35, No. 4Design of self-supporting lattices for additive manufacturingJournal of the Mechanics and Physics of Solids, Vol. 148Multi-failure analyses of additively manufactured lattice truss sandwich cylindersComposites Part B: Engineering, Vol. 207Study of sandwich panel application on side hull of crude oil tankerJournal of Applied Engineering Science, Vol. 19, No. 4Analysis and active control of nonlinear vibration of composite lattice sandwich plates3 November 2020 | Nonlinear Dynamics, Vol. 102, No. 4Characteristics of an improved boundary insert for sandwich panels with lattice truss coresAerospace Science and Technology, Vol. 107Vibration-based damage identification for ship sandwich plate using finite element method14 August 2020 | Open Engineering, Vol. 10, No. 1Architecture design of periodic truss-lattice cells for additive manufacturingAdditive Manufacturing, Vol. 34Vibration characteristics of novel multilayer sandwich beams: Modelling, analysis and experimental validationsMechanical Systems and Signal Processing, Vol. 142Dynamic modeling and vibration control of a coupled rigid-flexible high-order structural system: A comparative studyAerospace Science and Technology, Vol. 102Topological design of sandwich structures with graded cellular cores by multiscale optimizationComputer Methods in Applied Mechanics and Engineering, Vol. 361Concurrent design of hierarchical structures with three-dimensional parameterized lattice microstructures for additive manufacturing4 February 2020 | Structural and Multidisciplinary Optimization, Vol. 61, No. 3Nonlinear Flutter Suppression and Thermal Buckling Elimination for Composite Lattice Sandwich PanelsYuyang Chai, Fengming Li and Zhiguang Song16 July 2019 | AIAA Journal, Vol. 57, No. 11Flatwise compression property of hierarchical thermoplastic composite square latticeComposite Structures, Vol. 210 What's Popular Volume 56, Number 10October 2018 CrossmarkInformationCopyright © 2018 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved. All requests for copying and permission to reprint should be submitted to CCC at www.copyright.com; employ the ISSN 0001-1452 (print) or 1533-385X (online) to initiate your request. See also AIAA Rights and Permissions www.aiaa.org/randp. TopicsComputational Fluid DynamicsFinite Element MethodFluid DynamicsLaunch VehiclesMaterials TestingMechanical TestingMechanical and Structural VibrationsNumerical AnalysisSatellitesSpace Launch SystemsSpace SystemsSpace Systems and VehiclesSpacecraftsStructural AnalysisStructural Design and DevelopmentStructural EngineeringStructures, Design and Test KeywordsSatellitesResonant FrequenciesDirect Metal Laser MeltingTensile StrengthFEMRocket LaunchPower Spectral DensityAcceleration SensorsStructural FailureNumerical AnalysisAcknowledgmentsThis project was financially supported by the Young Elite Scientists Sponsorship Program from China Association for Science and Technology. The authors acknowledge the support from Beijing Institute of Spacecraft System Engineering and Beijing Key Laboratory of Intelligent Space Robotic Systems Technology and Applications.PDF Received21 March 2018Accepted9 May 2018Published online29 June 2018