Abstract:Inspired by the natural hollow structures, periodic lattice structures composed of hollow struts and spheres were designed and fabricated by selective laser melting (SLM) process with 316L stainless steel. Two architecture configurations with Body-Centered Cubic (BCC) and Face-Centered Cubic (FCC) symmetry were taken into consideration. Finite element (FE) simulations based on representative volume element (RVE) models and cell-assembly models were conducted to investigate the elastic response and large deformation behavior of the hollow lattice materials, respectively. Afterwards, compression experiments were carried out on an electronic universal machine and a drop hammer (DH) system to explore the quasi-static and dynamic mechanical response of the lattice specimens. The complete deformation evolutions of the lattice samples under different loading velocities were captured through high-resolution photography and inspected by the digital imaging correlation (DIC) analysis. Both the experimental research and numerical simulations demonstrated that the hollow beam cross-sections contributed to the stable crushing response of the proposed lattice structures under either quasi-static or dynamic compression. Accordingly, the post-yield behavior of the tested lattice structures was quite smooth without any fluctuations. Meanwhile, the specific strength and energy absorption of the hollow lattice structures were found to be superior to many existed lattice materials with solid struts, and comparable with the reported triply periodic minimal surface (TPMS) lattice structures. Finally, the effect of the geometric characteristic parameters on the specific mechanical properties of the lattice structures was discussed according to the supplemental analysis by numerical simulations.

Multi-failure analyses of additively manufactured lattice truss sandwich cylinders

Additively-manufactured Lattice-Grid Sandwich Cylinders and Elastoplastic Multi-Failure Analyses

Quasi-static Compressive Behaviors of Large-Size Titanium Lattice Sandwich Structure Based on Pulse Hot-Wire Arc Additive Manufacturing

Compression Experiment and Failure Analysis of Additive Manufactured Multi-Layer Lattice Sandwich Structure

Additively manufactured truss-core sandwich cylinders: Materials, processes and performances

Large-diameter Metal Matrix Composite Lattice Truss Sandwich Cylinder: Additive Manufacturing, Testing and Analyzing

Fracture and Failure Behavior of Additive Manufactured Ti6Al4V Lattice Structures under Compressive Load

Mechanical Properties and Failure Modes of Additively Manufactured Ti6Al4V Lattice Structures under Quasi-Static Compressive Loading

Mechanical and Self-Monitoring Behaviors of 3D Printing Smart Continuous Carbon Fiber-Thermoplastic Lattice Truss Sandwich Structure

Multi-failure analyses of carbon fiber reinforced anisogrid lattice cylinders

Failure of carbon fiber composite sandwich cylinders with a lattice core under axial compressive loading

Additively Manufactured Lattice Truss Sandwich Cylinder and Free Vibration Behaviors

Crushing Behavior of Multi-Layer Metal Lattice Panel Fabricated by Selective Laser Melting

Design and Simulation of an Innovative Cylinder Fabricated by Selective Laser Melting

Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis

Mechanical Analysis and Modeling of Metallic Lattice Sandwich Additively Fabricated by Selective Laser Melting

Architecture Design of Periodic Truss-Lattice Cells for Additive Manufacturing

Deformation Behavior of Heterogeneous Multi-Morphology Lattice Core Hybrid Structures

An Experimental and Numerical Investigation into Compressive Failure of Pyramidal Lattice Sandwich Structures Fabricated Using Stereolithography Technology

Mechanical Behaviors of SLM Additive Manufactured Octet-Truss and Truncated-Octahedron Lattice Structures with Uniform and Taper Beams

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings